Question about Mirror/UX

[Patrick Wallek]

>>This is a simple matter of not following
>>basic command syntax.

No, it isn't. It is a matter of 'lvextend' not being aware of the '-m' option. It plainly says '"m": Illegal option.' If you notice the 'usage' statement it says nothing about the '-m' option.

It appears, as others have basically said, that Mirror/UX is not installed. Or maybe more accurately not COMPLETELY installed for some reason.

I would reinstall Mirror/UX at your first opportunity. I don't recall if it requires a reboot or not.

>>lvextend -m 1 /dev/vg01/lvol1 /dev/dsk/c1t0d0
>>That is good syntax.

That is true.

[James R. Ferguson]

Hi:

I'm in agreement with Patrick. You might try running a full 'swverify' to make sure that everything is in the state you think it is;

# swverify \*

Regards!

...JRF...

[SUDHAKAR_18]

Hi,

swlist -l fileset -a state |grep -v -e "#" -e "configured"

please run the above command & provide the output. Mirror disk may not installed properly.

[AVV]

Hello,

Please check whether you had the Mirror UX software installed in your system. I assumes it is not there.

#swlist | grep -i mirror

and check with that.

If there is no Mirror UX , you have to install and reboot the server for building the new kernel and the mirroring.

Best of Luck

[dictum9]

If I run:

swlist -l product | grep -i mirr

Nothing shows up.

But look at this. Does that mean I have mirror-ux installed? This is 11.23.


#: swlist -l fileset |grep -i mir
LVM.LVM-MIRROR-RUN B.11.23 LVM Mirror
PHCO_34036.LVM-MIRROR-RUN 1.0 LVM.LVM-MIRROR-RUN

[bobsam]

hi S-un-B-ix-S ,

Like all i am also doubtou full that you are installed Mirror/UX properly,
Jest check it by
#swlist -l bundle
Mirror UX will come in the top. If it is installed properly then you can mirrored it by using #lvextend -m 1 (option), with out installing Mirror ux properly then you will not get -m option from lvextend,

Please confirm your first disk device file..


thanks,

[Prasanth Thomas]

HI,

Please let me know is this issue resolved???

If not please share me the o/p f below command

# ioscan -m dsf
# strings /etc/lvmtab
#ls -ltr /dev/disk/*


Regards,
Prasanth Thomas.

[Prasanth Thomas]

i am suspecting this issue with your second disk device file. You did not extend the VG properly for that please share the o/p which i have requested you earlier.

Regards,
PT.