cancel
Showing results for 
Search instead for 
Did you mean: 

RDP, EVA and RHEL 5

JuanCruz
Occasional Visitor

RDP, EVA and RHEL 5

Hi,

I have a EVA4100 and servers connected to RHEL 5 EVA bag when an image of a server, the RDP only makes disk presented at the EVA and not from the local disks, someone can help me please.

Regards,
2 REPLIES
Steven E. Protter
Exalted Contributor

Re: RDP, EVA and RHEL 5

Shalom,

This is normal. The EVA can't see local disks.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Jimmy Vance
HPE Pro

Re: RDP, EVA and RHEL 5

RHEL will see the EVA disks before the local disks as the EVA disks are presented as /dev/sda and the local disks are /dev/cciss/c0d0

Basically there are two options during the install. Disconnect the EVA, or modify you kickstart file using the 'driveorder' and 'ondisk' options

KS example:

bootloader --location=mbr --driveorder=cciss/c0d0,cciss/c0d1 --append="rhgb quiet"

clearpart --all --drives=cciss/c0d0,cciss/c0d1 --initlabel

zerombr yes
clearpart --drives=cciss/c0d0 --all

partition /boot --fstype=ext3 --size=200 --ondisk=cciss/c0d0
partition swap --size=1000 --grow --maxsize=2000 --ondisk=cciss/c0d0
partition / --fstype=ext3 --size=700 --grow --ondisk=cciss/c0d0




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!