cancel
Showing results for 
Search instead for 
Did you mean: 

RHEL cluster

 
Fadia Almarei
Super Advisor

RHEL cluster

Dear All

i want a step by step dowcumentaton of RHEL AS4.6 cluster installation and confiuration i see documents from Redhat but i need more detailed and specific information ( it is running on HP DL580 servers, i will use it as active/passive to run oralce10g cluster

BR;
Fadia Almarei
fadia.marei
4 REPLIES
Steven E. Protter
Exalted Contributor

Re: RHEL cluster

Shalom,

Best docs:
search itrc.hp.com

http://www.centos.org/docs/4/html/rh-cs-en-4/CS_4-RHEL4U2-relnotes.txt

http://www.redhat.com/docs/manuals/csgfs/browse/rh-cs-en/

http://unixnotebook.blogspot.com/2005/07/redhat-cluster-4-how-to.html

Take your choice.

With the HP class of server use iLo as your cluster device.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Steven E. Protter
Exalted Contributor

Re: RHEL cluster

Change cluster device in my last post to fencing device.

Enjoy your reading.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Fadia Almarei
Super Advisor

Re: RHEL cluster

it is not clear to me that if i need to configure a quourm devices to be shared between the servers and how to do this , another thing is how to configure a shared partition etween the servers to run the service and is it acceptable to use LVM for this or not ? kindly clarify
fadia.marei
Ivan Ferreira
Honored Contributor

Re: RHEL cluster

>>> it is not clear to me that if i need to configure a quourm devices to be shared between the servers and how to do this

You must use a fence device and optionally you can use a quorum device.

>>> another thing is how to configure a shared partition etween the servers to run the service and is it acceptable to use LVM for this or not ? kindly clarify

You can use Cluster LVM, that is, your volume group should be set as "clustered". Then if you want to use a file system on it, you should use a shared file system as GFS or OCFS2.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?