HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

 
senthilwinin
Occasional Visitor

RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

Dear All,
Between server and storage connectivity is in SCSI and using IRM for raid configuration.
in that 4 hdd are failed and after replacement of hdd, from storage path not visible in ioscan -fnC disk. simply it show internal server disk.
Check cable working fine. Through irm tool i can see all hdd and raid configuration.

Pl help.

Senthil
9 REPLIES
Joelmel Roche
Valued Contributor

Re: RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

Hi, you should be all of disk are "online status" on IRM.

run IRM and go to Object and select Physical Drive... you can see the physical disk status..

please advice the status...

regards,
senthilwinin
Occasional Visitor

Re: RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

I attached irdisplay -f,irdiag -v /dev/iop0 and nickel output.

Regards
Senthilkumar.M
senthilwinin
Occasional Visitor

Re: RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

After i earsed all configuraion in ds2300 storage through IRM, reconfigured as its ealier configured.

After i tryed to create a vg in name of exiting vgname. it showing a error.

Pls help to configure in step by step.
Steven E. Protter
Exalted Contributor

Re: RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

Shalom,

insf -C disk
insf -e

Try again.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Torsten.
Acclaimed Contributor

Re: RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

>> it showing a error.


Does it say error only or does it tell you something more???

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
S.N.S
Valued Contributor

Re: RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

Hi,

What Error Message do U get?

Like SEP said,

insf -C disk...
insf -e


HTH
SNS
"Genius is 1% inspiration, 99% Perspiration" - Edison
Joelmel Roche
Valued Contributor

Re: RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

Hi,

you must remove 1st using vgexport the vg's aasign on lvmtab
example:
vgchange -a n vg01
vgexport /dev/vg01
and create vg01

regards,
senthilwinin
Occasional Visitor

Re: RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

What about PV.?.want to create newly or not required.

Regards
Senthilkumar.M
Torsten.
Acclaimed Contributor

Re: RP 5470 + DS2300 Storage harddisk not sensing in hp-ux 11.11i V1

>> After i tryed to create a vg in name of exiting vgname. it showing a error.


If you have now newly created LUNs, you need to remove the previously VG definition first (vgexport). Then pvcreate and vgcreate your "new" VG.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!