HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

RX2660 XDM host unwilling to manage

 
Shattia Moorthi
Frequent Advisor

RX2660 XDM host unwilling to manage

Dear frenz
does any body know where from this error message comes and how to solve this problem? I get it on trying to open an Reflection-X-Connection to RX2660 on HP-UX 11.31. The connection will not be opened. Error message "the specified XDM host is unwilling to manage (RX2109)".
I can ping to server,telnet and ftp.

Please help. Very urgent
4 REPLIES
rariasn
Honored Contributor

Re: RX2660 XDM host unwilling to manage

Hi.

By default 11.31 does not install CDE. You will need to install it from the original install media.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1423727

rgs,
Torsten.
Acclaimed Contributor

Re: RX2660 XDM host unwilling to manage

I agree, check if CDE is installed.


Hint: download and try "mobaxterm" as terminal emulator!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Wim Rombauts
Honored Contributor

Re: RX2660 XDM host unwilling to manage

And if CDE is installed, verify if you have a file /etc/dt/config/Xaccess.
This file contains the hosts that are allowed to connect to the XDM service
Shattia Moorthi
Frequent Advisor

Re: RX2660 XDM host unwilling to manage

Thank you guys.