Operating System - HP-UX
1748169 Members
3542 Online
108758 Solutions
New Discussion юеВ

RX3600 /satnd/vmunix hang.

 
ashanabey
Advisor

RX3600 /satnd/vmunix hang.

Hi
I am having problem first time boot from hpux 11.23 to 11.31 update. During the update process there is no errors or warnings.

Before I start the update process I have installed latest update-ux from 11.31 sep 2010 DVD 1 and HW firmware is up to date.

Thanks,
Ashan

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...
AUTO BOOT> boot vmunix
> System Memory = 2040 MB
loading section 0
................................................ (complete)
loading section 1
............ (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
....
loading MFSFILES directory (bootfs) to MFS
...........
Launching /stand/vmunix
SIZE: Text:24254K + Data:5873K + BSS:5200K = Total:35328K
legend the heart and lend the hand
2 REPLIES 2
ashanabey
Advisor

Re: RX3600 /satnd/vmunix hang.

also having issie with

AUTOBOOTING...> System Memory = 73697 MB
loading section 0
........................................................................................ (complete)
loading section 1
............. (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
....x
loading MFSFILES directory (bootfs) to MFS
.x..xx.......x..xx..............x..x.x.
Launching /stand/vmunix
SIZE: Text:45024K + Data:6497K + BSS:30137K = Total:81659K ├п hang

***********************************************************
* ROM Version : 04.11
* ROM Date : 10/20/2008
* BMC Version : 05.25
***********************************************************
0 0 0x0015B2 0x0000000025841896 boot time event
1 0 0x0000A4 0x0000000000000000 start memory configuration
2 0 0x001CBB 0x0000000000000000 System set to insecure mode
0 0 0x0015B2 0x0000000085372369 boot time event
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
1 0 0x000009 0x0000000000000000 CPU0 launch EFI
HP 1Port 4Gb Fibre Channel Adapter (driver 1.01, firmware 4.00.070)
HP 1Port 4Gb Fibre Channel Adapter (driver 1.01, firmware 4.00.070)
EFI version 2.00 [14.62]
EFI64 Running on Intel(R) Itanium Processor Family
UEFI 2.0 IPF server rx3600 7.14 [Fri Feb 23 17:21:28 2007] firmware by HP
Loading 'SysROM:Floating-Point Software Assistance Handler'...
-- 'SysROM:Floating-Point Software Assistance Handler' returned Success
Loading 'SysROM:Broadcom Gigabit Ethernet Driver'...

Copyright (c) 2000-2006 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v9.4.4

-- 'SysROM:Broadcom Gigabit Ethernet Driver' returned Success
Loading 'SysROM:SCSI Bus Driver'...
-- 'SysROM:SCSI Bus Driver' returned Success
Loading 'SysROM:SCSI Disk Driver'...
-- 'SysROM:SCSI Disk Driver' returned Success
Loading 'SysROM:SCSI Tape Driver'...
-- 'SysROM:SCSI Tape Driver' returned Success
Loading device drivers
EFI Boot Manager ver 2.00 [14.62] Firmware ver 1.31 [4632]
legend the heart and lend the hand
Viktor Balogh
Honored Contributor

Re: RX3600 /satnd/vmunix hang.

> I am having problem first time boot from hpux 11.23 to 11.31 update. During the update process there is no errors or warnings.

This is not a surprise. Instead of updating several people choose to reinstall the system with the new version. The update only works in 50% of the cases.
****
Unix operates with beer.