Raid 1 to Raid 0 conversion in HP Smart array

[smanikrajan]

hi

We are asked change the Raid 1 configuration in a blade to Raid 0 to get more space.Raid 1 had two disks of 600GB each.After changing the raid level to 0 we still see the usable space as 600G only.Please help me to know if any further changes needs to be done.Command exected was hpacucli ctrl slot=0 ld 1 modify raid0

ctrl all show config detail

Smart Array P410i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: 50014380211C1D40
Cache Serial Number: PBCDF0CRH1A1JQ
RAID 6 (ADG) Status: Disabled
Controller Status: OK
Hardware Revision: C
Firmware Version: 5.70
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Surface Scan Mode: Idle
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 25% Read / 75% Write
Drive Write Cache: Disabled
Total Cache Size: 1024 MB
Total Cache Memory Available: 912 MB
No-Battery Write Cache: Disabled
Cache Backup Power Source: Capacitors
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True

Logical Drive: 1
Size: 558.9 GB
Fault Tolerance: RAID 0
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 256 KB
Status: OK
Caching: Enabled
Unique Identifier: 600508B1001C0A20396F8D308A3AC733
Disk Name: /dev/sda
Mount Points: /boot 200 MB
OS Status: LOCKED
Logical Drive Label: ADC1EA5050014380211C1D40950B
Drive Type: Data
Array: A
Interface Type: SAS
Unused Space: 572294 MB
Status: OK
Array Type: Data

physicaldrive 1I:1:1
Port: 1I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 600 GB
Rotational Speed: 10000
Firmware Revision: HPD4
Serial Number: EA01PC41BWY91215
Model: HP EG0600FBDSR
Current Temperature (C): 32
Maximum Temperature (C): 56
PHY Count: 2
PHY Transfer Rate: 6.0Gbps, Unknown

physicaldrive 1I:1:2
Port: 1I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 600 GB
Rotational Speed: 10000
Firmware Revision: HPD4
Serial Number: EA01PC41BY2R1215
Model: HP EG0600FBDSR
Current Temperature (C): 30
Maximum Temperature (C): 57
PHY Count: 2
PHY Transfer Rate: 6.0Gbps, Unknown

SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250
Device Number: 250
Firmware Version: RevC
WWID: 50014380211C1D4F
Vendor ID: PMCSIERA
Model: SRC 8x6G