System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Rebooted server and now it will not boot correctly

 
John Town
Advisor

Rebooted server and now it will not boot correctly

Hi, Everyone. I have an rx8620 and rebooted the server to reset a hung DVD. Now the server boots with error and freezes. I see a problem trying to mount /stand. But don't know if problem is with hw or sw.

shudown

sapedrp1:/>shutdown -ry 0

SHUTDOWN PROGRAM
04/23/10 10:24:54 AST


Broadcast Message from root (pts/ta) Fri Apr 23 10:24:54...

PLEASE LOG OFF NOW ! ! !

System maintenance about to begin.

All processes will be terminated in 0 seconds.





Broadcast Message from root (pts/ta) Fri Apr 23 10:24:54...

SYSTEM BEING BROUGHT DOWN NOW ! ! !




/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)



System shutdown in progress
___________________________

Stop kwdbd ...................................................... N/A
Stopping HP-UX Apache-based Web Server .......................... OK
Stopping HP-UX Tomcat-based Servlet Engine. ..................... N/A
Stopping HP-UX Webmin-based Admin ............................... OK
Stopping the HPUX Webproxy subsystem ............................ OK
Stopping HP-UX XML Web Server Tools ............................. OK
Stop NFS server subsystem ....................................... OK
Stopping the NetBackup client daemons ........................... OK
Shutting down CIFS Client ....................................... N/A
Stopping Event Monitoring Service ............................... OK
Stop interrupt balance daemon ................................... N/A
Shutting down the Winbind Daemon ................................ OK
Unload/Uninstall XF86 DLKM Helper Modules ....................... N/A
Stopping the gWLM Agent ......................................... OK
Reset PRM and shut down PRM daemons ............................. OK
Shutting down the System Management HomePage server ............. OK
Stopping USB hub daemon ......................................... OK
Stop auditing subsystem ......................................... OK
Stop environment monitoring daemon .............................. OK
Stop diagnostic subsystem ....................................... OK
Stop clock daemon ............................................... OK
Stop print spooler .............................................. FAIL *
Stop accounting ................................................. N/A
Stopping time synchronization ................................... N/A
Stop vt daemon .................................................. OK
Terminating X Font Server ....................................... OK
Stopping HP-UX Secure Shell ..................................... OK
Stopping Instant Capacity ....................................... OK
Stop CIM cimserver subsystem .................................... OK
Stop RPC daemon ................................................. OK
Stop DCE daemons ................................................ OK
Stopping OSPF MIB Network Management subAgent ................... N/A
Stopping SNMP HP-UNIX Network Management subAgent ............... OK
Stopping SNMP IPv6 Network Management subAgent .................. OK
Stopping SNMP MIB-2 Network Management subAgent ................. OK
Stopping Native Adapter Agent ................................... OK
Stopping SNMP Trap Dest Network Management subAgent ............. OK
Stopping SNMP Master Network Management daemon .................. OK
Stopping outbound connection daemons for DDFA software .......... N/A
Stopping syslog-ng daemons ...................................... N/A
Stopping cfengine's cfservd daemon .............................. N/A
Shutting down sendmail [Done] Shutting down sm-client [Done] .... OK
Stopping IPv6 router advertisement daemon ....................... N/A
Stopping remote system status daemon ............................ N/A
Stopping RARP protocol daemon ................................... N/A
Stop PPPoE configuration ........................................ N/A
Stop PPP configuration .......................................... OK
Stopping router discover protocol daemon ........................ N/A
Stopping ramd routing daemon .................................... N/A
Stopping dynamic routing daemon ................................. N/A
Stopping Internet services daemon ............................... OK
Stopping multicast routing daemon ............................... N/A
Stop AUTOFS subsystem ........................................... OK
Stop NFS client subsystem ....................................... OK
Stop lock manager subsystem ..................................... OK
Stop NIS client subsystem ....................................... OK
Stop ldap client daemon ......................................... OK
Stop NIS/LDAP server subsystem .................................. N/A
Stop NIS server subsystem ....................................... OK
Stop NFS core subsystem ......................................... OK
Stopping ISEE hpservices mad daemon. ............................ OK
Stopping name server daemon ..................................... N/A
VxVM VVR INFO V-5-4-2419 Stopping VRAS daemon ................... OK
VxVM VVR INFO V-5-4-2419 Stopping VxRSync daemon ................ OK
Unconfiguring DHCPv6 Interfaces ................................. OK
VxVM VVR INFO V-5-2-3620 Stopping Communication Daemon .......... OK
Stopping DHCPv6 Server daemon ................................... N/A
Unconfigure LAN interfaces ...................................... OK
Unconfigure LAN interfaces for IPv6 ............................. OK
Unconfigure HP igssn Gigabit Ethernet interfaces ................ OK
Unconfigure HP gelan Gigabit Ethernet interfaces ................ OK
Unconfigure HP iether 100BT/Gigabit Ethernet interfaces ......... OK
Unconfigure HP igelan Gigabit Ethernet interfaces ............... OK
Stop network tracing and logging daemon ......................... OK
Stop pty allocator daemon ....................................... OK
Stop system message logging daemon .............................. OK
Stopping sfmdb PostgreSQL daemons ............................... OK
Stop Software Distributor agent daemon .......................... OK
Stop Essential Services monitoring daemon ....................... OK
Stopping Event Management (EVM) ................................. OK
Unconfigure Loopback interfaces (lo0) ........................... OK
Stopping VERITAS Enterprise Administrator Service (vxsvc) ....... OK
Stop Utmp Daemon ................................................ OK
Stopping livedump subsystem ..................................... OK
Stop syncer daemon .............................................. OK
Killing user processes .......................................... OK
Starting the fsdaemon for transition into single-user mode ...... OK
Apply kernel configuration changes for next boot ................ N/A
Unmount file systems ............................................ OK
VxVM INFO V-5-2-3254 Stopping all Volume Manager I/O Daemons .... OK

* - An error has occurred !
* - Refer to the file /etc/rc.log for more information.



Transition to run-level 0 is complete.
Executing "/sbin/reboot ".
Shutdown at 10:29 (in 0 minutes)


*** FINAL System shutdown message from root@sapedrp1 ***


System going down IMMEDIATELY

Note: reboot: Couldn't write to : /dev/pts/tb

System shutdown time has arrived
logout root
There are running jobs.


reboot

Selected boot option: HP-UX Primary Boot: 0/0/0/2/0.0x6.0x0

Loading.: HP-UX Primary Boot: 0/0/0/2/0.0x6.0x0

Executing Image: "\EFI\HPUX\HPUX.EFI"
Optional Data : NONE

Starting: HP-UX Primary Boot: 0/0/0/2/0.0x6.0x0


(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.035

[0m [37m [40mPress Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 10 9 8 7 6 5 4 3 2 1 0
AUTOBOOTING...> System Memory = 57211 MB
loading section 0
........................................................................... (complete)
loading section 1
............ (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
...........................
Launching /stand/vmunix
SIZE: Text:37957K + Data:5912K + BSS:19469K = Total:63339K

[H [2J [H [2JConsole is on Serial Device - via PCDP
Booting kernel...

Loaded ACPI revision 2.0 tables.

Using /stand/ext_ioconfig



Memory Class Setup

-------------------------------------------------------------------------

Class Physmem Lockmem Swapmem

-------------------------------------------------------------------------

System : 54417 MB 54417 MB 54417 MB

Kernel : 54417 MB 54417 MB 54417 MB

User : 52460 MB 47030 MB 47214 MB

-------------------------------------------------------------------------



ktracer is off until requested.

Installing Socket Protocol families AF_INET and AF_INET6

Kernel EVM initialized

sec_init(): kernel RPC authentication/security initialization.

secgss_init(): kernel RPCSEC_GSS security initialization.

rpc_init(): kernel RPC initialization.

rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)

NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 10.

NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 11.

NOTICE: cachefsc_install: cachefs File system was registered at index 13.

Boot device's HP-UX HW path is: 0.0.0.2.0.6.0

igelan0: INITIALIZING HP PCI-X 1000Base-T Built-in at hardware path 0/0/0/1/0

iether1: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 0/0/4/1/0/6/0

iether2: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 0/0/4/1/0/6/1

iether3: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 0/0/6/1/0/6/0

iether4: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 0/0/6/1/0/6/1

iether5: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 0/0/14/1/0/6/0

iether6: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 0/0/14/1/0/6/1



System Console is on the Built-In Serial Interface

iether7: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 1/0/4/1/0/6/0

iether8: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 1/0/4/1/0/6/1

iether9: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 1/0/6/1/0/6/0

iether10: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 1/0/6/1/0/6/1

iether11: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 1/0/14/1/0/6/0

iether12: INITIALIZING HP AD194-60001 PCI/PCI-X 1000Base-T 2-port 4Gb FC/2-port 1000B-T Combo Adapter at hardware path 1/0/14/1/0/6/1

AF_INET socket/streams output daemon running, pid 100

afinet_prelink: module installed

Starting the STREAMS daemons-phase 1

LVM: Root VG activated

Swap device table: (start & size given in 512-byte blocks)

entry 0 - major is 64, minor is 0x2; start = 0, size = 134217728

Checking root file system.
log replay in progress
replay complete - marking super-block as CLEAN
Root check done.
Create STCP device files

Starting the STREAMS daemons-phase 2

$Revision: vmunix: B.11.31_LR FLAVOR=perf

Memory Information:

physical page size = 4096 bytes, logical page size = 4096 bytes

Physical: 58584060 Kbytes, lockable: 44413608 Kbytes, available: 49977108 Kbytes



/sbin/ioinitrc:
/dev/vg00/lvol1:file system is clean - log replay is not required
Unable to mount /stand - please check entries in /etc/fstab
Skipping KRS database initialization - /stand can't be mounted

/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" is already active on this system.
Activated volume group
Volume group "/dev/vgqr1ora" has been successfully changed.
Activated volume group
Volume group "/dev/vgqr1log" has been successfully changed.
Activated volume group
Volume group "/dev/vgqr1sap" has been successfully changed.
Activated volume group
Volume group "/dev/vgqx1ora" has been successfully changed.
Activated volume group
Volume group "/dev/vgqx1log" has been successfully changed.
Activated volume group
Volume group "/dev/vgqx1sap" has been successfully changed.
Checking vxfs file systems
vxfs fsck: V-3-20913: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write)
vxfs fsck: V-3-20915: /dev/vg00/lvol1:sanity check: /dev/vg00/lvol1 OK
vxfs fsck: V-3-20915: /dev/vg00/lvol4:sanity check: /dev/vg00/lvol4 OK
vxfs fsck: V-3-20915: /dev/vg00/lvol5:sanity check: /dev/vg00/lvol5 OK
vxfs fsck: V-3-20915: /dev/vg00/lvol6:sanity check: /dev/vg00/lvol6 OK
vxfs fsck: V-3-20915: /dev/vg00/lvol7:sanity check: /dev/vg00/lvol7 OK
vxfs fsck: V-3-20915: /dev/vg00/lvol8:sanity check: /dev/vg00/lvol8 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol1:sanity check: /dev/vgqr1ora/lvol1 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol4:sanity check: /dev/vgqr1ora/lvol4 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol5:sanity check: /dev/vgqr1ora/lvol5 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol6:sanity check: /dev/vgqr1ora/lvol6 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol7:sanity check: /dev/vgqr1ora/lvol7 OK
vxfs fsck: V-3-20915: /dev/vgqr1log/lvol1:sanity check: /dev/vgqr1log/lvol1 OK
vxfs fsck: V-3-20915: /dev/vgqr1log/lvol2:sanity check: /dev/vgqr1log/lvol2 OK
vxfs fsck: V-3-20915: /dev/vgqr1log/lvol3:sanity check: /dev/vgqr1log/lvol3 OK
vxfs fsck: V-3-20915: /dev/vgqr1log/lvol4:sanity check: /dev/vgqr1log/lvol4 OK
vxfs fsck: V-3-20915: /dev/vgqr1log/lvol5:sanity check: /dev/vgqr1log/lvol5 OK
vxfs fsck: V-3-20915: /dev/vgqr1sap/lvol1:sanity check: /dev/vgqr1sap/lvol1 OK
vxfs fsck: V-3-20915: /dev/vgqr1sap/lvol2:sanity check: /dev/vgqr1sap/lvol2 OK
vxfs fsck: V-3-20915: /dev/vgqr1sap/lvol3:sanity check: /dev/vgqr1sap/lvol3 OK
vxfs fsck: V-3-20915: /dev/vgqr1sap/lvol4:sanity check: /dev/vgqr1sap/lvol4 OK
vxfs fsck: V-3-20915: /dev/vgqr1sap/lvol5:sanity check: /dev/vgqr1sap/lvol5 OK
vxfs fsck: V-3-20915: /dev/vgqx1ora/lvol1:sanity check: /dev/vgqx1ora/lvol1 OK
vxfs fsck: V-3-20915: /dev/vgqx1ora/lvol2:sanity check: /dev/vgqx1ora/lvol2 OK
vxfs fsck: V-3-20915: /dev/vgqx1ora/lvol3:sanity check: /dev/vgqx1ora/lvol3 OK
vxfs fsck: V-3-20915: /dev/vgqx1ora/lvol4:sanity check: /dev/vgqx1ora/lvol4 OK
vxfs fsck: V-3-20915: /dev/vgqx1ora/lvol5:sanity check: /dev/vgqx1ora/lvol5 OK
vxfs fsck: V-3-20915: /dev/vgqx1ora/lvol7:sanity check: /dev/vgqx1ora/lvol7 OK
vxfs fsck: V-3-20915: /dev/vgqx1ora/lvol8:sanity check: /dev/vgqx1ora/lvol8 OK
vxfs fsck: V-3-20915: /dev/vgqx1ora/lvol9:sanity check: /dev/vgqx1ora/lvol9 OK
vxfs fsck: V-3-20915: /dev/vgqx1log/lvol1:sanity check: /dev/vgqx1log/lvol1 OK
vxfs fsck: V-3-20915: /dev/vgqx1log/lvol2:sanity check: /dev/vgqx1log/lvol2 OK
vxfs fsck: V-3-20915: /dev/vgqx1log/lvol3:sanity check: /dev/vgqx1log/lvol3 OK
vxfs fsck: V-3-20915: /dev/vgqx1log/lvol4:sanity check: /dev/vgqx1log/lvol4 OK
vxfs fsck: V-3-20915: /dev/vgqx1log/lvol5:sanity check: /dev/vgqx1log/lvol5 OK
vxfs fsck: V-3-20915: /dev/vgqx1sap/lvol1:sanity check: /dev/vgqx1sap/lvol1 OK
vxfs fsck: V-3-20915: /dev/vgqx1sap/lvol2:sanity check: /dev/vgqx1sap/lvol2 OK
vxfs fsck: V-3-20915: /dev/vgqx1sap/lvol4:sanity check: /dev/vgqx1sap/lvol4 OK
vxfs fsck: V-3-20915: /dev/vgqx1sap/lvol5:sanity check: /dev/vgqx1sap/lvol5 OK
vxfs fsck: V-3-20915: /dev/vgqx1sap/lvol3:sanity check: /dev/vgqx1sap/lvol3 OK
vxfs fsck: V-3-20915: /dev/vgqx1sap/lvol6:sanity check: /dev/vgqx1sap/lvol6 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol8:sanity check: /dev/vgqr1ora/lvol8 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol9:sanity check: /dev/vgqr1ora/lvol9 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol10:sanity check: /dev/vgqr1ora/lvol10 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol11:sanity check: /dev/vgqr1ora/lvol11 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol12:sanity check: /dev/vgqr1ora/lvol12 OK
vxfs fsck: V-3-20915: /dev/vgqr1ora/lvol13:sanity check: /dev/vgqr1ora/lvol13 OK
vxfs fsck: V-3-20915: /dev/vgqx1ora/lvol6:sanity check: /dev/vgqx1ora/lvol6 OK

Cleaning /etc/ptmp...
(c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-2000 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993 The Open Software Foundation, Inc.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2006 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.

Confidential computer software. Valid license from HP required for
possession, use or copying. Consistent with FAR 12.211 and 12.212,
Commercial Computer Software, Computer Software Documentation, and
Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.

vxfs: NOTICE: msgcnt 1 mesg 001: V-2-1: vx_nospace - /dev/root file system full (1 block extent)


INIT: 1.failed write of utmps entry: "sqnc"

/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)

/sbin/auto_parms[24]: who: not found
/sbin/auto_parms[34]: ps: not found
/sbin/auto_parms[34]: grep: not found
. *s1^ i

/sbin/rc1.d/S093vxvm-reconfig[44]: /etc/vx/lib/vxcommon: not found
interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

/sbin/rc[14]: /sbin/rc2.d/S021esm: not found
interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

/sbin/rc[14]: /sbin/rc2.d/S544cfservd: not found
interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

/sbin/rc[14]: /sbin/rc2.d/S546syslog-ng: not found
/sbin/rc[14]: /sbin/rc2.d/S605hpservices: not found
/sbin/rc2.d/S620xfs[10]: grep: not found
/sbin/rc2.d/S620xfs[10]: env: not found
/sbin/rc2.d/S701xf86[252]: /var/tmp/xf86.log: cannot create
/sbin/rc2.d/S701xf86[268]: tee: not found
interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

/sbin/rc[14]: /sbin/rc2.d/S810sfmdb: not found
/sbin/rc[14]: /sbin/rc2.d/S872hpsmhd: not found
interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

/sbin/rc[14]: /sbin/rc2.d/S895gwlmagt: not found
interpreter "/usr/bin/sh" not found

/sbin/rc[14]: /sbin/rc2.d/S910rstEMSlistener: not found
interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

/sbin/rc[14]: /sbin/rc2.d/S951nbclient: not found
interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

/sbin/rc[14]: /sbin/rc2.d/S996vradmind: not found
interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

/sbin/rc[14]: /sbin/rc2.d/S996vxrsyncd: not found
interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

/sbin/rc[14]: /sbin/rc2.d/S999isisd: not found

HP-UX Start-up in progress
__________________________

Configure system crash dumps ............................................... OK
Removing old vxvm files .................................................... OK
........................................................................... OK
........................................................................... OK
........................................................................... FAIL *
Mount file systems ......................................................... FAIL *
Setting hostname ........................................................... FAIL *
Start containment subsystem configuration .................................. FAIL *
Set privilege group ........................................................ N/A
Display date ............................................................... N/A
Save system crash dump if needed ........................................... N/A
Start evp .................................................................. OK
Enable auxiliary swap space ................................................ FAIL *
Start syncer daemon ........................................................ N/A
Initializing livedump ...................................................... N/A
Start Utmp Daemon : manages User Accounting Database ....................... FAIL *
Error: Cannot find "/usr/lbin/sw/control_utils". ........................... FAIL *
Configure Loopback interfaces (lo0) ........................................ FAIL *
Starting Event Management (EVM) (phase 1) .................................. OK
........................................................................... interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

FAIL *
........................................................................... OK
Continuing install jobs, configuring filesets .............................. FAIL *
Configuring all unconfigured software filesets ............................. FAIL *
Configuring PFIL ........................................................... N/A
Starting IPFilter .......................................................... N/A
ERROR: /opt/sec_mgmt/bastille/swLoopbackConfig.sh not present. Exiting. .... FAIL *
Recover editor crash files ................................................. OK
Clean UUCP ................................................................. N/A
List and/or clear temporary files .......................................... OK
Clean up old log files ..................................................... OK
Start system message logging daemon ........................................ N/A
Checking user database ..................................................... N/A
Start pty allocator daemon ................................................. N/A
Configuring OLA/R interface ................................................ N/A
Start network tracing and logging daemon ................................... N/A
Configure HP igelan Gigabit Ethernet interfaces ............................ FAIL *
Configure HP iether 100BT/Gigabit Ethernet interfaces ...................... FAIL *
Configure HP gelan Gigabit Ethernet interfaces ............................. FAIL *
Configure HP igssn Gigabit Ethernet interfaces ............................. FAIL *
Configure INTEL 100BASE-T interfaces ....................................... N/A
Configure HP 100BASE-T interfaces .......................................... N/A
Configure HP AUTO-PORT AGGREGATION interfaces .............................. FAIL *
Configure VLAN interfaces .................................................. OK
Configure LAN interfaces ................................................... FAIL *
Configure LAN interfaces for IPv6 .......................................... OK
Starting Event Management (EVM) (phase 2) .................................. FAIL *
Configure Auto-Port Aggregation(LAN Monitor) interfaces .................... FAIL *
Starting DHCPv6 Server daemon .............................................. N/A
Configuring DHCPv6 Interfaces .............................................. interpreter "/usr/bin/ksh" not found

FAIL *
Start name server daemon ................................................... FAIL *
Starting HP-UX Secure Shell ................................................ N/A
Start NFS core subsystem ................................................... FAIL *
Start NIS server subsystem ................................................. OK
Start ldap client daemon ................................................... N/A
Start NIS/LDAP server subsystem ............................................ N/A
Start NIS client subsystem ................................................. OK
Start lock manager subsystem ............................................... FAIL *
Start NFS client subsystem ................................................. FAIL *
Start AUTOFS subsystem ..................................................... FAIL *
Finish containment subsystem configuration ................................. FAIL *
Start multicast routing daemon ............................................. N/A
Start Internet services daemon ............................................. FAIL *
Start dynamic routing daemon ............................................... N/A
Start ramd routing daemon .................................................. N/A
Start router discover protocol daemon ...................................... N/A
Configuring PPP Interface .................................................. FAIL *
Configuring PPPoE .......................................................... N/A
Start RARP protocol daemon ................................................. N/A
Start remote system status daemon .......................................... N/A
Start IPv6 router advertisement daemon ..................................... FAIL *
Starting sendmail [Done] Starting sm-client [Done] ......................... FAIL *
........................................................................... interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

FAIL *
........................................................................... interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

FAIL *
Starting outbound connection daemons for DDFA software ..................... N/A
Start SNMP Master Network Management daemon ................................ FAIL *
Start OSPF MIB Network Management subAgent ................................. N/A
Start SNMP HP-UNIX Network Management subAgent ............................. FAIL *
Start SNMP IPv6 Network Management subAgent ................................ FAIL *
Start SNMP MIB-2 Network Management subAgent ............................... FAIL *
Start Native Adapter Agent ................................................. N/A
Start SNMP Trap Dest Network Management subAgent ........................... FAIL *
Start DCE daemons .......................................................... N/A
Start RPC daemon if needed ................................................. N/A
Start CIM cimserver subsystem .............................................. N/A
Initialize Instant Capacity ................................................ FAIL *
Starting X Font Server at TCP port 7000 .................................... N/A
Start vt daemon ............................................................ N/A
Start time synchronization ................................................. N/A
Start accounting ........................................................... N/A
........................................................................... N/A
Starting the password/group assist subsystem ............................... N/A
Start print spooler ........................................................ N/A
Start clock daemon ......................................................... N/A
Check Security Bulletin Compliance ......................................... N/A
Start diagnostic subsystem ................................................. OK
Start environment monitoring daemon ........................................ N/A
Start auditing subsystem ................................................... N/A
Start USB hub daemon ....................................................... FAIL *
SAM System administration configuration .................................... OK
........................................................................... interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

FAIL *
Configure PRM -or- Configure and Enable PRM ................................ N/A
Initialize Software Distributor agent daemon ............................... FAIL *
........................................................................... interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

FAIL *
Starting CIFS Client ....................................................... N/A
Configure HP RAID SA interfaces ............................................ N/A
Copy processor logs to /var/tombstones ..................................... N/A
Creating any missing lvm configuration backups ............................. OK
Starting Event Monitoring Service .......................................... OK
Start EMS SNMP subagent .................................................... interpreter "/usr/lib/hpux32/uld.so" not found

exec(2): could not load a.out

FAIL *
Start interrupt balance daemon ............................................. FAIL *
Configuring Ultra320 SCSI Mass Storage interfaces .......................... FAIL *
Starting the Winbind Daemon ................................................ N/A
Configuring HP SerialSCSI SASD Mass Storage interfaces ..................... FAIL *
........................................................................... interpreter "/usr/bin/sh" not found

FAIL *
Reconfiguring setboot event subscription ................................... OK
........................................................................... interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

FAIL *
Configuring HP Fibre Channel FCD Mass Storage interfaces ................... FAIL *
........................................................................... N/A
........................................................................... interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

FAIL *
........................................................................... interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

FAIL *
........................................................................... interpreter "/bin/sh" not found

file link resolves to "/usr/bin/sh"

FAIL *
Start NFS server subsystem ................................................. FAIL *
Starting HP-UX Apache-based Web Server ..................................... N/A
Starting HP-UX Tomcat-based Servlet Engine ................................. N/A
Starting HP-UX Webmin-based Admin .......................................... N/A
Starting the HPUX Webproxy subsystem ....................................... N/A
Starting HP-UX XML Web Server Tools ........................................ OK
Start kwdbd ................................................................ N/A
Validating HP Virtual Machine Configuration ................................ N/A
Starting the amgrd subsystem ............................................... N/A
Starting PRNGD (Pseudo Random Number Generator Daemon) ..................... N/A

* - An error has occurred !
* - Refer to the file /etc/rc.log for more information.



The system is ready.

INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id:util "/usr/lbin/utild # Utilization Provider daemon"

INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id:icap "/usr/lbin/icapd # Instant Capacity daemon"
5 REPLIES
Steven Schweda
Honored Contributor

Re: Rebooted server and now it will not boot correctly

I know nothing, but the first things which
stood out to me were:

> Unable to mount /stand - please check entries in /etc/fstab

and:

> vxfs: NOTICE: msgcnt 1 mesg 001: V-2-1: vx_nospace - /dev/root file system full (1 block extent)

I'd try booting into single-user mode, and,
if that succeeds, start poking around to see
what I could see (file system full, corrupt
"/etc/fstab", ...).
Raj D.
Honored Contributor

Re: Rebooted server and now it will not boot correctly

John,

> Unable to mount /stand - please check entries in /etc/fstab
Skipping KRS database initialization - /stand can't be mounted


> vxfs: NOTICE: msgcnt 1 mesg 001: V-2-1: vx_nospace - /dev/root file system full (1 block extent)

- Following needs to be check:
- To boot in single user mode , mount the filesystems , # vgchange -a y vg00 # mount /dev/vg00/

-May be you need to run fsck before you can mount it.
- check if /etc/fstab is ok. Some wrong character inside the file would casue the problem. You can check the timestamp on the file. and then verify the content of the /etc/fstab. keep a backup copy first. # cp /etc/fstab /etc/fstab.old.DATE . If any entry is wrong , then remove or comment it.

- check root filesystem space:
# bdf /dev/vg00/lvl3

If root filesystem is full, needs to cleanup little bit.
- After checking the above two (fstab and root fs) , system can be rebooted in multiusermode , (or just use init 3) and to check further.

Hth,
Raj.
" If u think u can , If u think u cannot , - You are always Right . "
Raj D.
Honored Contributor

Re: Rebooted server and now it will not boot correctly

To boot in single user mode:

- Interupt at EFI screen.
- go to shell prompt.
EFI:shell> boot vmunix -is


HTH,
Raj.
" If u think u can , If u think u cannot , - You are always Right . "
SoorajCleris
Honored Contributor

Re: Rebooted server and now it will not boot correctly

HI ,

"I have an rx8620 and rebooted the server to reset a hung DVD."

What was the activity?
Were you trying to copy something to / ??

Not able to mount /stand
and / is full .. Both matters


Boot in to single usermod if not then lvm maintenance , check the free space and try ..

Regards,
Sooraj
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie
John Town
Advisor

Re: Rebooted server and now it will not boot correctly

The problem was a that the disk went bad and OS was corrupted. Replaced disk and ignited the server again. Thanks.