HPE Community
Operating System - HP-UX
1753550 Members
5492 Online
108795 Solutions
New Discussion юеВ

Re: Replacement of root disk in vPar

 
SOLVED
Go to solution
bhargavi
Advisor

тАО01-12-2010 09:04 AM

тАО01-12-2010 09:04 AM

Replacement of root disk in vPar

May i know what is the procedure to replace the root disk in vPar?

Note:One of the root disk failed so we need to replace the new root disk.
0 Kudos
Reply
2 REPLIES 2
Steven E. Protter
Exalted Contributor

тАО01-12-2010 09:08 AM

тАО01-12-2010 09:08 AM

Solution

Re: Replacement of root disk in vPar

Shalom,

The normal scenario is:

1) Replace the disk. If this was SAN based, present a new disk to the system.
2) Restore the root vg, vg00 of the system using Ignite. The backup was made using make_net_recovery

http://docs.hp.com/en/T1335-90018/ch03s09.html

http://docs.hp.com/en/T1335-90083/ch10s02.html

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Reply
Torsten.
Acclaimed Contributor

тАО01-12-2010 09:08 AM

тАО01-12-2010 09:08 AM

Re: Replacement of root disk in vPar

Same way as a non vPars system

http://docs.hp.com/en/5991-1236/When_Good_Disks_Go_Bad_WP.pdf

but the auto boot string must point to vpmon, not vmunix.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.