1748092 Members
5834 Online
108758 Solutions
New Discussion юеВ

SAM & DLT-8000

 
SOLVED
Go to solution
Lutz Hild
Occasional Advisor

SAM & DLT-8000

Hi,
I've installed an external DLT-8000 with a separate SCSI-controller on a HP-UX 10.20A. The adaptor and the DLT are proberly recognized by the system and claimed. The internal DDS-3 got /dev/rmt/0m and the DLT got /dev/rmt/1m as device-files. I can tar to both tapes, SAM recognizes both tapes, but using the option |interactive backup|, SAM refuses to work with the DLT-drive (1m is not a valid output device). Does a patch solve this problem?

Thanks,

Lutz
5 REPLIES 5
melvyn burnard
Honored Contributor
Solution

Re: SAM & DLT-8000

Depending on which type of 9000 you have, ensure you install PHKL_20590 for s700, and PHKL_20591 for s800.

This should help solve this problem
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
CHRIS ANORUO
Honored Contributor

Re: SAM & DLT-8000

Download PHCO_19990. This will help also.
When We Seek To Discover The Best In Others, We Somehow Bring Out The Best In Ourselves.
Lutz Hild
Occasional Advisor

Re: SAM & DLT-8000

Thanks Melvyn,
the patches are installed and the problem is still there. When I try to create a backup-job with the DLT-8000, SAM gives me this message: NOTE:
SAM internal error. The error handler has gotten the errorcode 1 of type NOTE with the associated strings: 10/12.15.0 Quantum DLT8000.
The machine is a J282.
Lutz Hild
Occasional Advisor

Re: SAM & DLT-8000

Thanks Chris,
I've already tried to get this patch but the patch not available.
CHRIS ANORUO
Honored Contributor

Re: SAM & DLT-8000

Lutz,

PHCO_19990 has been superseded by PHCO_21186


Cheers!
When We Seek To Discover The Best In Others, We Somehow Bring Out The Best In Ourselves.