Operating System - HP-UX
1748170 Members
4293 Online
108758 Solutions
New Discussion юеВ

Re: SAN ignite tape recovery on pa-risc !

 
SOLVED
Go to solution
titu
Regular Advisor

SAN ignite tape recovery on pa-risc !

SAN ignite tape recovery on pa-risc

This is how you can use 2 step recovery steps:

Boot the installation CD/DVD.
select
-> Install HP-UX -> select Advanced Installation -> Recovery tape -> GO!

Will these steps will be applicable in case of the pa-risc system ?

Thanks in advance

Titu
5 REPLIES 5
Patrick Wallek
Honored Contributor
Solution

Re: SAN ignite tape recovery on pa-risc !

Yes, I believe they will still work.

I also think that the version of Ignite/UX on the CD/DVD you boot from, and the version of Ignite that the tape was created with have to be the same.
Tim Nelson
Honored Contributor

Re: SAN ignite tape recovery on pa-risc !

Why not just stick the tape in and boot the tape?

What is the purpose of booting from the dvd and then telling it to use the tape when you can just boot the tape ?

UVK
Trusted Contributor

Re: SAN ignite tape recovery on pa-risc !

Though the steps work as Tim said, Why dont u try booting from tape ?
-------------------------------------------
Like it or worked !! Click kudos !!
titu
Regular Advisor

Re: SAN ignite tape recovery on pa-risc !

Thanks for reply.

I am not able to attach the tape directly to the system.

This tape is attached to system though SAN based tape library.

Thanks in advance.

Titu
Prashanth Waugh
Esteemed Contributor

Re: SAN ignite tape recovery on pa-risc !

Hi Titu,
1) First check are using ingnite server and ignite client for taking the ignite backup
2) Are you using DP software for ignite backup .
3) let me know the how the server is connected thorough san switch to tape library

Regards
Prashant
For success, attitude is equally as important as ability