HPE Community
Operating System - HP-UX
1753830 Members
8947 Online
108806 Solutions
New Discussion юеВ

Re: SAN tapes - no spec. files

 
Oldrich Kejik
Occasional Contributor

тАО12-09-2009 03:40 AM

тАО12-09-2009 03:40 AM

SAN tapes - no spec. files

I have a rx2620 in SAN with MSL6000. By ioscan command I get:

0/3/1/1.3.13.255.0.0.0 unknown HP MSL6000 Series
0/3/1/1.3.13.255.0.0.1 unknown HP Ultrium 3-SCSI
0/3/1/1.3.13.255.0.0.2 unknown HP Ultrium 3-SCSI
0/3/1/1.3.13.255.0.0.3 ctl HP NS E1200-320

Why unknown? No spec. files in /dev/rmt for tape exist.
Any idea ?
Thanks.
O. Kejik
0 Kudos
4 REPLIES 4
Torsten.
Acclaimed Contributor

тАО12-09-2009 04:10 AM

тАО12-09-2009 04:10 AM

Re: SAN tapes - no spec. files

You need to add "schgr" and "stape" to the kernel (kcmodule).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Michal Kapalka (mikap)
Honored Contributor

тАО12-09-2009 04:13 AM

тАО12-09-2009 04:13 AM

Re: SAN tapes - no spec. files

hi,

if you attache a tape to the system you need to have stape driver enabled into the kernel.

insf -e to generate special files.

mikap
0 Kudos
Oldrich Kejik
Occasional Contributor

тАО12-09-2009 04:36 AM

тАО12-09-2009 04:36 AM

Re: SAN tapes - no spec. files

Thanks.
Ooooo... I'm a stupid one !!!
A nice day.
OK
0 Kudos
Oldrich Kejik
Occasional Contributor

тАО12-09-2009 04:37 AM

тАО12-09-2009 04:37 AM

Re: SAN tapes - no spec. files

The problem solved.
OK
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.