Operating System - HP-UX
1753479 Members
5007 Online
108794 Solutions
New Discussion юеВ

Re: SAS Controller Firmware

 
SOLVED
Go to solution
JoeBob_2
Occasional Advisor

SAS Controller Firmware

Is there a way I can determine the version of SAS controller firmware while the system is running HP-UX?
8 REPLIES 8
Steven E. Protter
Exalted Contributor

Re: SAS Controller Firmware

Shalom,

Not sure.

There are two threads on the subject:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1090334

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1097328

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
TTr
Honored Contributor
Solution

Re: SAS Controller Firmware

sasmgr get_info -D /dev/

sasmgr get_info -D /dev/sasd0
JoeBob_2
Occasional Advisor

Re: SAS Controller Firmware

Thanks, that did the trick.
Torsten.
Acclaimed Contributor

Re: SAS Controller Firmware

For all who need a reference:

$ sasmgr get_info -D /dev/sasd0
Driver Name : sasd
Bundle Version : B.11.31.01
Product Number : 399490-001
Hardware Path : 0/4/1/0
Health of HBA : ONLINE
PCI Vendor ID : 0x1000
PCI Device ID : 0x0054
PCI Subsystem Vendor ID : 0x3228
PCI Subsystem ID : 0x103c
PCI Revision ID : 0x0000
Max. PHYs supported : 8
Max. IO size : 1048576

*********************************************************************
***** HBA Specific information *****
*********************************************************************
HBA state : READY
Driver firmware dump available : NO
Driver firmware dump timestamp : N/A
Firmware Revision : 1.16.0.0

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JoeBob_2
Occasional Advisor

Re: SAS Controller Firmware

Torsten, Thanks!
Torsten.
Acclaimed Contributor

Re: SAS Controller Firmware

I think you would not ask without a reason.

Be carefull!

Older driver version does check and update the firmware too, newer doesn't.

But driver and firmware must match.

Newest is

FW version: 1.23.33.00, EFI driver: 2.01.04.00

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3257031&prodNameId=3257032&swEnvOID=54&swLang=13&mode=2&taskId=135&swItem=ux-55042-1


You need to read and follow this document:

http://docs.hp.com/en/14556/sas_fw_update-e3.pdf


Otherwise you may have a serious problem.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JoeBob_2
Occasional Advisor

Re: SAS Controller Firmware

Torsten, thanks for the additional commentary. This will be helpful.
Torsten.
Acclaimed Contributor

Re: SAS Controller Firmware

Finally, here is the driver:

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=SerialSCSI-00

You will probably need patches, see

http://h20392.www2.hp.com/portal/swdepot/displayInstallInfo.do?productNumber=SerialSCSI-00


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!