HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

SAS Controller Smart Array p411 not detected.

 
deepakb977
Occasional Contributor

SAS Controller Smart Array p411 not detected.

Hi,

I have installed the SAS card p411 in the rx 2660 server . But I am not able to see the card from os with ioscan -f..

My OS version is HPUX B.11.23. I am trying to connect my HP LTO-6 Ultrium 6250 tape drive through this sas controller. But I am not able to see the sas card itself?

Please help me to detect my sas card?

 

Thanks,

 

2 REPLIES
Steven Schweda
Honored Contributor

Re: SAS Controller Smart Array p411 not detected.

> [...] My OS version is HPUX B.11.23. [...]

   Then why ask in a VMS forum?

> [...] But I am not able to see the sas card itself?

   Does 11.23 support this card?

Torsten.
Acclaimed Contributor

Re: SAS Controller Smart Array p411 not detected.

Why not posting the "ioscan -fn"?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!