Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

SAS and SCSI configured to MirrorDisk/UX

Luis Otavio da Costa
Occasional Advisor

SAS and SCSI configured to MirrorDisk/UX

Hi people,

Can we combine SAS internal disk drives without RAID configuration and a SCSI enclosure (like MSA30 family ) to mirroring internal (SAS) to external (SCSI ) disks ?

Regards

 

 

P.S. This thread has been moevd from disk to HP-UX > sysadmin. - Hp forum Moderator

2 REPLIES
Luk Vandenbussche
Honored Contributor

Re: SAS and SCSI configured to MirrorDisk/UX

Hi Luis,

You can perfectly do this.
Mirror/ux works on disks level and doesn't check the controller behind the disk.

I have no idea what the performance of this combination will be. It is a good opportunity to test it.
Highlighted
Luis Otavio da Costa
Occasional Advisor

Re: SAS and SCSI configured to MirrorDisk/UX

Thanks a lot .

The performance ( you mentioned ) could be an issue ?