System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Server not booting up after removing one fc card

 
SOLVED
Go to solution
Avik Chatterjee
Occasional Contributor

Server not booting up after removing one fc card

I have removed one fc card, again inserted that one.But starting the server, it is not booting up.It is not getting its primary boot path and going into shell.From shell this is not getting the EFI partition to boot up.

When I am giving the command fs0: from shell prompt " not found " message came. also in map -r there is no fs0 or fs1 entry.

Please help me.
Server is rx3600 and OS is HP-UX 11.23

avik
6 REPLIES
AnthonySN
Respected Contributor

Re: Server not booting up after removing one fc card

hi,
is your boot disk in san.
you may try to go to the boot menu options in the EFI menu and go to the particular folder where you will find a file called hpux.efi, add this to the boot options
Avik Chatterjee
Occasional Contributor

Re: Server not booting up after removing one fc card

My boot disk is the internal hard disk, which is in raid.

I have tried to boot from shell, but it is unable to find the efi boot partition.
avik
Avik Chatterjee
Occasional Contributor

Re: Server not booting up after removing one fc card

Actually it is unable to find any fsX map file.EFI Shell MAP shows not fsX map file .
avik
chris huys_4
Honored Contributor

Re: Server not booting up after removing one fc card

Hi,

Can you cut&paste the output of the map -r command ?

Shell> map -r

Greetz,
Chris
nightwich
Valued Contributor
Solution

Re: Server not booting up after removing one fc card

Hi Avic.

You shlould conside to boot from recovery tape.


If there is a one.


Regards.
Avik Chatterjee
Occasional Contributor

Re: Server not booting up after removing one fc card

Problem solved , after re installing the OS.
avik