Still could not run SMH

[haimi]

Hi gurus out there,

After a fresh installation of FOE 11.23 on my rx2660 integrity, I tried to access the SMH from FireFox -> http://localhost:2301

Initially I got a "Bus error" in the /opt/hpsmh/logs/smh.log.
Then I tried to start it manually from the command "/opt/hpsmh/lbin/smhstart" and this error is shown
"Pid 8983 in trap loop, signal 10
Bus error"

Please help ... im lost now.

[Torsten.]

What do you get if you run

# swlist | grep SysMgmtWeb

[Jeeshan]

run and try the following commands

#smhstartconfig -a

#hpsmh autostart

[haimi]

Hi Torsten,

This is the output.
******************************************
SysMgmtWeb A.2.2.8 HP-UX Web Based System Management User Interfaces
SysMgmtWeb.SysMgmtHomepage A.2.2.8 HP-UX System Manageme
nt Homepage - Web-Based User Interfaces

[haimi]

Hi Ahsan,

#hpsmh autostart

Starting the System Management HomePage server ...
Pid 12927 in trap loop, signal 10
ERROR: The System Management HomePage server could not be started successfully.

[Dennis Handly · Accepted solution]

Pid 12927 in trap loop, signal 10

This is the same as this thread. You need to contact the Response Center:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1245656

[Steven Muñoz Rodríguez]

somebody did resolve this issue?

[Steven Muñoz Rodríguez]

somebody resolve this issue?

[Dennis Handly]

>Steven: somebody resolve this issue?

You should be looking at the other thread I mentioned, not this one. Check versions and patches.

There was no further info there, so contact the Response Center and if you get more info, please update the other thread.

[George Genov]

Hi haimi,

Can you post a little more from the smh log

BR

George