System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

System board replaced and server rebooting after creating dump

 
sunny..
Occasional Contributor

System board replaced and server rebooting after creating dump


Hi All,

I am getting below error on 11.11 v1 c-8000 server. Please help to resolv this issue.


Main Menu:
Enter command or menu >
bo p0
Interact with IPL (Y, N, or Cancel)?>
n

Booting...
Boot IO Dependent Code (IODC) revision 2


HARD Booted.

ISL Revision A.00.43 Apr 12, 2000

ISL booting hpux

Boot
:
disk(0/2/1/0.6.0.0.0.0.0;0)/stand/vmunix
10850304 + 2101248 + 19611504 start 0x1ece68




alloc_pdc_pages:
Relocating PDC from 0xfffffff0f0c00000 to 0x3f700000.
00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domdation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultiether1:
INITIALIZING HP PCI 1000Base-T Built-in at hardware path 0/3/3/0

System Console is on the Built-In Serial Interface
Entering cifs_init...
Initialization finished successfully... slot is 9
Swap device table:
(start & size given in 512-byte blocks)
entry 0 - auto-configured on root device; ignored - can't open device
WARNING:
no swap device configured, so dump cannot be defaulted to primary swap.
WARNING:
No dump devices are configured. Dump is disabled.
mountfs:opend

linkstamp:
Thu Sep 11 11:05:21 EDT 2008
_release_version:
@(#
) $Revision:
vmunix:
vw:
-proj selectors:
CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
panic:
all VFS_MOUNTROOTs failed:
NEED DRIVERS ???


Firmware Version 2.13

Duplex Console IO Dependent Code (IODC) revision 1



Stored message buffer up to panic:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
SCSI Ultra320 0/2/1/0 instance 0:
IO Type :
MPT Domain Validation IO has timed-out. Target ID:
6, LUN ID:
0. Inquiry Command - CDB:
12 00 00 00 40 00
iether1:
INITIALIZING HP PCI 1000Base-T Built-in at hardware path 0/3/3/0

System Console is on the Built-In Serial Interface
Entering cifs_init...
Initialization finished successfully... slot is 9
Swap device table:
(start & size given in 512-byte blocks)
entry 0 - auto-configured on root device; ignored - can't open device
WARNING:
no swap device configured, so dump cannot be defaulted to primary swap.
WARNING:
No dump devices are configured. Dump is disabled.
mountfs:opend

System Panic:

linkstamp:
Thu Sep 11 11:05:21 EDT 2008
_release_version:
@(#
) $Revision:
vmunix:
vw:
-proj selectors:
CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
panic:
all VFS_MOUNTROOTs failed:
NEED DRIVERS ?????

PC-Offset Stack Trace (read across, top of stack is 1st):

0x001ff828 0x002f5e58 0x0035b07c
0x00458f24 0x0035b358 0x00169ac4
0x001ed464
End Of Stack

sync'ing disks (0 buffers to flush):
(0 buffers to flush):
0 buffers not flushed
0 buffers still dirty



*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.





ERROR:
No dump space is configured. Physical memory will not be dumped.





1 REPLY
Torsten.
Acclaimed Contributor

Re: System board replaced and server rebooting after creating dump

You should check if you have mixed the internal SCSI connectors (using the wrong connector will not work, due to a wrong path), check for bent pins also.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!