HPE Community
Operating System - HP-UX
1752653 Members
5989 Online
108788 Solutions
New Discussion юеВ

Re: Tape Library name

 
SOLVED
Go to solution
Mousa55
Super Advisor

тАО11-15-2009 03:50 AM

тАО11-15-2009 03:50 AM

Tape Library name

Hi All,

how i can know the Tape Library name from my HP server (8420) 11.11 or 11.23 version.
which library name in ux server.

thanks
0 Kudos
Reply
3 REPLIES 3
Aneesh Mohan
Honored Contributor

тАО11-15-2009 04:51 AM

тАО11-15-2009 04:51 AM

Solution

Re: Tape Library name


This is for Auto channger

#ioscan -fn |grep -i autoch

If you have ltt installed in you system ,then I belive you may get the info.

Regards,
Aneesh


Reply
Johnson Punniyalingam
Honored Contributor

тАО11-15-2009 07:45 AM

тАО11-15-2009 07:45 AM

Re: Tape Library name

You Can also try using ioscan & cstm

ioscan -fnC tape

from above command you can look for HW path of the tape drive match the below with cstm

cstm>map
cstm>sel dev 125 --> Dev Num (device number)
cstm>info
cstm>il

HTH,

Regards,
Johnson
Problems are common to all, but attitude makes the difference
Reply
Torsten.
Acclaimed Contributor

тАО11-15-2009 11:27 AM

тАО11-15-2009 11:27 AM

Re: Tape Library name

The library network name is for management via network, the operation works over FC or SCSI - so there is no direct relation.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.