HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

The CIM Server is not started

 
Arun Kumar D
Occasional Advisor

The CIM Server is not started

Hi ,

When I am starting the CIM Server , I am getting the folowing error .

leapepci#cimserver
PGS10033: The CIM Server is not started: PGS00216: Cannot create directory /var/opt/wbem/repository.
4 REPLIES

Re: The CIM Server is not started

Have you checked to make sure you can create that directory?
mkdir -p /var/opt/wbem/repository
Prashanth.D.S
Honored Contributor

Re: The CIM Server is not started

Hi Arun,

Seems like you are missing a directory called as wbem under /var/opt/ check if it is available if not you may have to reinstall the wbem software..

#ll /var/opt/ | grep wbem

Best Regards,
Prashanth
Camel_1
Valued Contributor

Re: The CIM Server is not started

I think you have to reinstall WBEM.
SoorajCleris
Honored Contributor

Re: The CIM Server is not started

Hi Arun ,

Is this a newinstallation / working setup??
Can you please swverify and check the output?

Regards,
Sooraj
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie