System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Time difference in NTP Server and Client

binu_mathew
Frequent Advisor

Time difference in NTP Server and Client

Hi,

 

We had a two hpux 11iv3 server with cluster . we have configured one as NTP server and other as client . But the time is not synchronizing from NTP server .There is a difference of around 1 minute , I think this will cause problem when the cluster comes up during failover .

Can someone tell me what should be the problem  . I have attached the ntp.conf from both servers .

 

1 REPLY
Highlighted
Horia Chirculescu
Honored Contributor

Re: Time difference in NTP Server and Client

Hello Mathew

You should specify that the local server operate in symmetric active mode with the remote server. This means that you should add in both configurations the directive:
peer <other_node_name> version 3
I believe that you could omit "version 3" as it is used by default (read the man page for NTP server)

Best regards from Romania,
Horia.