System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Tru64 5.1 Installation problem on AS1200

dhananjay_1
Frequent Advisor

Tru64 5.1 Installation problem on AS1200

Hello,

We have AS1200 server with Mylex DAC960 controller(KZPSC) on which two disk is configured as JBOD. Now while Installing Tru 64 5.1 I am getting the following error.

HALTED CPU 0
HALT CODE= 5
PC= ffffffff002c5f30

System Details-
Firmware Version - V6.0.4
PalCode - V1.23-2

Kindly help us .

Thanks & regards
Dhananjay





DJ
4 REPLIES
Michael Schulte zur Sur
Honored Contributor

Re: Tru64 5.1 Installation problem on AS1200

Hi,

could you specify what version you are installing? Is it 5.1 or 5.1A or 5.1B?
KZPSC is not supported anymore on some of these versions. At what stage of the install does the halt occur?

greetings,

Michael
dhananjay_1
Frequent Advisor

Re: Tru64 5.1 Installation problem on AS1200

Hello ,

We are installing Tru64-5.1A , we have tried to installed it on qlogic controller also but same problem persist.Hence how this can be resolv.


Rgeds
Dhananjay

DJ
Michael Schulte zur Sur
Honored Contributor

Re: Tru64 5.1 Installation problem on AS1200

When does the installation abort?
Any error messages?

Michael
dhananjay_1
Frequent Advisor

Re: Tru64 5.1 Installation problem on AS1200

Following are the messages during booting that appears before the system gives the error:

Firmware revision:6.0
Palcode: Unix version 1.23
Alphaserver 1200 5/533 4MB
pci1 (primary bus:1) at mcbus 0 slot 5
Loading SIOP : script c0000000, reg 7efff00,data c 000a000
pci4 (primary bus : 1 subordinate bus : 2) at pci1 slot 3
iso at pci4 slot 0
iso 0 : Qlogic ISP 1020A
isp 0 : Firmware revision 5.57 (loaded by console)

After the above messages the system gives the following error:
panic (cpu 0): Kernel Memory Fault

Regards,
Dhananjay
DJ