HPE Community
Operating System - Tru64 Unix
1753770 Members
4972 Online
108799 Solutions
New Discussion

Re: Tru64 5.1a no longer boot in an old AS4100, help?

 
SOLVED
Go to solution
Ralf Puchner
Honored Contributor

‎09-23-2004 09:01 PM

‎09-23-2004 09:01 PM

Re: Tru64 5.1a no longer boot in an old AS4100, help?

because nt uses the arc console and have no hardware autodetect (like tru64 4.x). Unix/VMS uses the srm console.

but this was answered already in this forum.....(so -> search)
Help() { FirstReadManual(urgently); Go_to_it;; }
0 Kudos
jfdez
New Member

‎09-27-2004 06:58 AM

‎09-27-2004 06:58 AM

Re: Tru64 5.1a no longer boot in an old AS4100, help?

I finally obtain a copy of the ECU floppy disk, and that´s the solution, I change several PCI card before and never have that problem, but never change the main board before...so I didn´t know that procedure... Thanks a lot to every one.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.