cancel
Showing results for 
Search instead for 
Did you mean: 

Tru64 remote deployment

Jim Garza_4
Occasional Advisor

Tru64 remote deployment

I am trying to set up a server to deploy Tru64 to other work stations just for testing purposes. When we have a workstation loose a drive or if there are issues with the NIC or FDDI, We could do the down load of the OS and check all areas of concern. Is there a script or way I can do this? Any help would be appreciated.
Thanks Jim Garza
4 REPLIES
Archunan Muthiah
Honored Contributor

Re: Tru64 remote deployment

Jim,

Do you like to monitor NIC/FDDI and other network components? If this is case, then you can try any network monitoring utilities available in the net.


Archunan
God is Artist, we are all just brushes
Jim Garza_4
Occasional Advisor

Re: Tru64 remote deployment

What I would like to do is be able to hook up a cross over cable or a straight cable and or set up a hub to a server with a load of Tru64 to be able to do a down load of the Tru64 OS to a work station.
Any ideas?

Thanks
Jim Garza
Mark Poeschl_2
Honored Contributor

Re: Tru64 remote deployment

Have you looked into RIS (Remote Installation Services) which is part of Tru64? There's a man page for it and related commands/files and it's fully covered in the Tru64 Installation Guide - Advanced Topics document.
Jim Garza_4
Occasional Advisor

Re: Tru64 remote deployment

Thanks,
I will look into it and will post my results.

thanks for all your help

Jim Garza