System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Ubuntu 14.04.02 on ML310e Install

 
New Member

Ubuntu 14.04.02 on ML310e Install

I just got in a ML310e v2 Gen 8 (Hot-Swap), I am trying to install Ubuntu on it, I have (2) 3TB drived installed in bays 1 and 2. I have in RSBU the b120i RAID enabled, I have configured a array and logical drive, on RAID 1, with no cache. During the install the partition manager still recognizes both drived individually and does not install properly, what am I doing wrong?

 

I have a LSI 9260 PCIe RAID card with BBU, that if i install an connect it to the HDDs the install runs just fine with no issues. I would leave this card in place except for that fact that with the card in place the POST takes forever. Literally about 8 -10 min just to get through POST. What I mean by POST is from the time the HP logo with the blue progress line shows up. With this card out POST only takes a min or two.

2 REPLIES 2
Highlighted
Honored Contributor

Re: Ubuntu 14.04.02 on ML310e Install

You need the 'hpvsa' driver which doesn't ship with any distribution

 

Canonical Launchpad

https://launchpad.net/~hp-iss-team

 

 

No support by private messages. Please ask the forum! 
Highlighted
Honored Contributor

Re: Ubuntu 14.04.02 on ML310e Install

After further investigation, the hpvsa driver was put on Launchpad for the initial release of 14.04 only.

 

No support by private messages. Please ask the forum!