System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to create clone using DRD

Ajay Kulkarni
Occasional Visitor

Unable to create clone using DRD

I am trying to create DRD on rp4440 running 11.23. DRD version A.3.0.0.1027. It fails with following errors
======= 12/29/10 14:12:54 EST BEGIN Clone System Image (user=root)

* Reading Current System Information
* Selecting System Image To Clone
* Selecting Target Disk
* The disk "/dev/dsk/c12t0d0" contains data which will be overwritten.
* Selecting Volume Manager For New System Image
* Analyzing For System Image Cloning
* Creating New File Systems
* Copying File Systems To New System Image
* Making New System Image Bootable
ERROR: Making the file system bootable on clone fails.
- Mounting the file system fails.
- Mounting the inactive system image fails.
- The LVM mapfile "/var/opt/drd/mapfiles/drd00mapfile" that is needed
by the "vgimport" command does not exist or is not readable.
* Making New System Image Bootable failed with 1 error.
* Unmounting New System Image Clone
* System image: "sysimage_000" on disk "/dev/dsk/c2t0d0"
ERROR: Unmounting the file system fails.
- Unmounting the clone image fails.
- The volume "/dev/drd00/lvol3" is part of the inactive system image,
but is mounted at "/var/opt/drd/mnts/sysimage_001/" rather than
under the directory "/var/opt/drd/mnts/sysimage_000". Unmount the
volume with umount(1M), then re-run drd.
* Unmounting New System Image Clone failed with 1 error.
* Cleaning up after clone errors.

======= 12/29/10 14:24:17 EST END Clone System Image failed with 2 errors.

Any help on this is appreciated.
3 REPLIES
Ajay Kulkarni
Occasional Visitor

Re: Unable to create clone using DRD

Thanks Shibin,
One of those three links helped me. All I had to do was to upgrade the version of DRD and it works fine.
Ajay Kulkarni
Occasional Visitor

Re: Unable to create clone using DRD

Upgrade the DRD to latest version