HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to see clariion devices.

 
Anthony Goes
Occasional Visitor

Unable to see clariion devices.

I have HP UX 11.31 and unable to see clariion devices.
2 REPLIES
Matti_Kurkela
Honored Contributor

Re: Unable to see clariion devices.

Welcome to the ITRC forums!

Check the EMC compatibility database ("E-Lab Interoperability Navigator") at EMC Powerlink ( http://powerlink.emc.com ) for any required firmware/driver/patch levels and storage configuration settings.

To find the Interoperability Navigator, once you've logged in to the Powerlink site, select "E-Lab Integration and Interoperability Testing" (the bottom item) from the Products menu.

Add at least your OS (=HP-UX 11.31), your HBA model and your Clariion model to the search "basket", then run a search.

MK
MK
SoorajCleris
Honored Contributor

Re: Unable to see clariion devices.


Hi ...
It is a wide question to answer!!!!
Could you please be a little specific.

Did you perform any troubleshooting steps yet??

Atleast, are you sure it was mapped to the perticular host?

Which card are you using?

Is there a fabric?

Regards
Sooraj

"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie