HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

Update-UX problem

 
rrhkrs
Frequent Advisor

Update-UX problem

Hi All,

I have running Update-ux to update 11iv3 from 1203 to 1603 in vpar using console connect.

I have the problem when it ask to change media number "2".

After I change the media and press enter key.  (vMP>EJ >> swap media >> vMP>IN >> vMP>co)

 It prompt "unmount: cannot unmount /dev/dsk/c0t0d0 : Device busy".

I can't ssh access the system trobleshoot.

Any idea can help to solve this problem?

Regards

 

 

3 REPLIES
Torsten.
Acclaimed Contributor

Re: Update-UX problem

did you force an eject before it was unmounted?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
rrhkrs
Frequent Advisor

Re: Update-UX problem

I try to Force eject in vMP prompt.  But error are same.

 

Torsten.
Acclaimed Contributor

Re: Update-UX problem

You can't do so much wrong here.

Here is an older recording of the same procedure - does it look similar for you?

 

=======================================================================
USER INTERACTION REQUIRED:

To complete the installation you must now insert the
"B7994 11.23 Mission Critical OE: DVD2" CD.

Once this is done, press the <Return> key to continue:

vMP MAIN MENU

CO: Console
CM: Command Menu
CL: Console Log
SL: Show Event Logs
VM: Virtual Machine Menu
HE: Main Help Menu
X: Exit Connection

[server] vMP> ej

Ejectable Guest Devices
Num Hw-path (Bus,Slot,Tgt) Gdev Pstore Path
-------------------------------------------------------------------------
[1] 0/0/1/0.3.0 (0,1,3) dvd file /var/tmp/ISO/installdvd1
.iso

Enter menu item number or [Q] to Quit: 1

Confirm eject action
G - Go
F - Force

Enter menu item or [Q] to Quit: g

[server] vMP> in

Insertable Guest Devices
Num Hw-path (Bus,Slot,Tgt) Gdev
--------------------------------------------
[1] 0/0/1/0.3.0 (0,1,3) dvd

 

Enter menu item number or [Q] to Quit: 1

Insertable File Backing Stores
Num File
---------------------
[1] installdvd1.iso
[2] installdvd2.iso

Enter menu item number or [Q] to Quit: 2

Confirm insertion action
G - Go
F - Force

Enter menu item or [Q] to Quit: g

[server] vMP> co

 

(Use Ctrl-B to return to vMP main menu.)

* Starting swinstall of the source (B7994 11.23 Mission Critical OE:
DVD2).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!