System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Using evaperf on HPUX v3, EVA6100

SOLVED
Go to solution
PatRoy
Regular Advisor

Using evaperf on HPUX v3, EVA6100

Hi. I need to do some speed test with out EVA6100 from HPUX 11.31. Been told about evaperf.

Does anyone know where to get this, and know of a URL that will explain how to use this tool?

Thanks. PAt
7 REPLIES
Jeff Schussele
Honored Contributor
Solution

Re: Using evaperf on HPUX v3, EVA6100

Try here:

javascript:openExternal('http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locBasepartNum=co-30754-1〈=English')

Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
PatRoy
Regular Advisor

Re: Using evaperf on HPUX v3, EVA6100

Im getting "The page you requested can not be found." :(
smatador
Honored Contributor

Re: Using evaperf on HPUX v3, EVA6100

Hi,
Evaperf is part of CV, look this docs
http://h71028.www7.hp.com/ERC/downloads/5983-1674EN.pdf?jumpid=reg_R1002_USEN
Hope this helps
Highlighted
Jeff Schussele
Honored Contributor

Re: Using evaperf on HPUX v3, EVA6100

Yep - sorry I should have checked.
Let me troll around further.

Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Jeff Schussele
Honored Contributor

Re: Using evaperf on HPUX v3, EVA6100

Hey PatRoy (Watch that left HAnd CAp :%)),

Here's the URL for the manual.
I suspect that if this is a "pay-for-use" product then you'll need to contact your HP Rep.
Else everything's available on software.hp.com.
Just search judiciously.
Try this;

http://h71028.www7.hp.com/ERC/downloads/5983-1674EN.pdf?jumpid=reg_R1002_USEN

Good Luck,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
PatRoy
Regular Advisor

Re: Using evaperf on HPUX v3, EVA6100

Thanks Jeff ;)

I've printed out the white papers... thanks! But where do I get the actual binary to run on hpux 11.31 (v3)

The PDF leads me to
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=471498&prodTypeId=12169&prodSeriesId=471497&swLang=13&taskId=135&swEnvOID=7


But that only seems to have the v1, v2 version... ??
smatador
Honored Contributor

Re: Using evaperf on HPUX v3, EVA6100

Hi,
Install cv on windows, you will get the evaperf. You should interact with the windows cv to you hpux 11.31 box
Look at the releases notes
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=471497&swItem=co-64828-1&prodNameId=3664268&swEnvOID=1005&swLang=13&taskId=135&mode=4&idx=0