HPE Community
Operating System - HP-UX
1753304 Members
6551 Online
108792 Solutions
New Discussion юеВ

Re: VGID

 
SOLVED
Go to solution
gany59
Regular Advisor

тАО04-14-2010 09:59 AM

тАО04-14-2010 09:59 AM

VGID

how can we command to find put the VGID of a PV
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО04-14-2010 10:04 AM

тАО04-14-2010 10:04 AM

Re: VGID

Try vgexport in preview mode, e.g.

# vgexport -p -v -s -m /tmp/vgXX.map vgXX

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
James R. Ferguson
Acclaimed Contributor

тАО04-14-2010 10:05 AM

тАО04-14-2010 10:05 AM

Re: VGID

Hi:

See my last post in this thread:

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1181590

Regards!

...JRF...
0 Kudos
Reply
Raj D.
Honored Contributor

тАО04-14-2010 10:55 AM

тАО04-14-2010 10:55 AM

Solution

Re: VGID

Gany,

Check this out:
# xd -An -j8200 -N16 -tx /dev/rdsk/cxtxdx

3rd +4rth field = VGID . 1+2=PVID 3=CPUID.

[ Where /dev/rdsk/cxtxdx is the PV of the VG ]


You can also get the VGID when you take a map file backup using vgimport with -s option.


Cheers,
Have fun!,
Raj.
" If u think u can , If u think u cannot , - You are always Right . "
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.