System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Vericut installation on HPUX 11.11

SOLVED
Go to solution

Vericut installation on HPUX 11.11

Hi, Good evening.

I am installing Vericut licence software on HPUX 11.11 V2. when i gave the command as install.ux it gave me the following error.

#./install.ux


CGTech Software Installation Program

Copyright, All Rights Reserved




Creating temporary CGTech Installation directory /tmp/cgtech_install...
Creating CD file links in temporary CGTech Installation directory /tmp/cgtech_install...


The following Java version will be used to install VERICUT:

./install.ux[77]: java: not found.


Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
No Java virtual machine could be found from your PATH
environment variable. You must install a VM prior to
running this program.

Removing temporary CGTech Installation directory /tmp/cgtech_install...

CGTech Software Installation completed: Tue Dec 8 14:55:53 MST 2009

Please which Java version shall i install and how to install it on HPUX.If possile please provide the link to download the same


Thanks in advance.
Jinu
33 REPLIES
Robert-Jan Goossens_1
Honored Contributor
Solution

Re: Vericut installation on HPUX 11.11

Dennis Handly
Acclaimed Contributor

Re: Vericut installation on HPUX 11.11

>Please which Java version shall I install and how to install it on HP-UX. If possible please provide the link to download the same

Does Vericut give any suggestions?

See: http://www.hp.com/go/java

There should be directions on how to use swinstall to install your depot.

Re: Vericut installation on HPUX 11.11

Hi Robert,
Thanks for the replay.

I have downloaded the same from the same link and installed on HPUX system.
when i checked it after installation.
#swlist
it shows me java is installed on HPUX
but i am in dout that its the problem some where mis match of java path.


Re: Vericut installation on HPUX 11.11

the same error is giving after i installed the JRE5.0..so please help how to check it successfully installed or not
Robert-Jan Goossens_1
Honored Contributor

Re: Vericut installation on HPUX 11.11

Hi Jinu,

Try setting you PATH variable manually before executing the install.

# export PATH=$PATH:/opt/javaXX/jre/bin

change the XX into your installed version.

Regards,
Robert-Jan

Re: Vericut installation on HPUX 11.11

Dear Robert,

i have done the path setting but still the same error is coming as below after executing the ./install.ux.

Thanks & regards
Jinu





creating temporary CGTech Installation directory /tmp/cgtech_install...
Creating CD file links in temporary CGTech Installation directory /tmp/cgtech_install...


The following Java version will be used to install VERICUT:

./install.ux[77]: java: not found.


Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
No Java virtual machine could be found from your PATH
environment variable. You must install a VM prior to
running this program.

Removing temporary CGTech Installation directory /tmp/cgtech_install...

CGTech Software Installation completed: Tue Dec 8
Robert-Jan Goossens_1
Honored Contributor

Re: Vericut installation on HPUX 11.11

Hi Jinu,

Also add the JAVA_PATH to your profile.

# export JAVA_PATH=/opt/javaXX/jre/bin

Regards,
Robert-Jan

Re: Vericut installation on HPUX 11.11

Dear Robert,

I have done the same but it is showing same error.

more over while iam executing this command
#java -version from this path /opt/java1.5/jre/bin it is giving error as below
/sbin/sh: java: not found.

i think it should show the version..
please help

Thanks & Regards
Jinu
Torsten.
Acclaimed Contributor

Re: Vericut installation on HPUX 11.11

First try to logout and back in in order to use the modified profile.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: Vericut installation on HPUX 11.11

Dear Torsten,

I have logout and logged in but it is showing the same error


Thanks & regards,
Jinu
Torsten.
Acclaimed Contributor

Re: Vericut installation on HPUX 11.11

I think /opt/java1.5/jre/bin should be in PATH, but obviously it isn't. Looks like your installer just calls "java" without looking in a particular path.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Robert-Jan Goossens_1
Honored Contributor

Re: Vericut installation on HPUX 11.11

Hi again,

# cd /opt
# find . -name java

Regards,
Robert-Jan

Re: Vericut installation on HPUX 11.11

Dear Robert

I have done the result is as shown

# find -name java
Usage: find path-list [predicate-list]


Thanks & Regards,

Jinu

Re: Vericut installation on HPUX 11.11

dear Robert,

sorry

i have tried it is executing the resul is


./VRTSob/extensions/GlobalObject/IsisSkin/java
./VRTSob/extensions/ObguiPrint/IsisSkin/java
./VRTSob/extensions/PrintController/IsisSkin/java
./VRTSob/extensions/System/IsisSkin/java
./VRTSob/extensions/alertlog/IsisSkin/java
./VRTSob/extensions/controlPanel/IsisSkin/java
./VRTSob/extensions/genericlogger/IsisSkin/java
./VRTSob/extensions/VxSearch/IsisSkin/java
./VRTSob/msgcats/system/IsisSkin/java
./VRTSob/jre/bin/PA_RISC/native_threads/java
./VRTSob/jre/bin/java
./VRTSob/jre/bin/PA_RISC2.0/native_threads/java
./VRTSfspro/msgcats/system/IsisSkin/java
./java1.5/jre/bin/java
./java1.5/jre/bin/PA_RISC2.0/java
./java1.5/jre/bin/PA_RISC2.0W/java





Robert-Jan Goossens_1
Honored Contributor

Re: Vericut installation on HPUX 11.11

Try this.

# which java

# /java1.5/jre/bin/java -version

RJ
Torsten.
Acclaimed Contributor

Re: Vericut installation on HPUX 11.11

As said, it is likely not in PATH, try

# export PATH=$PATH:/opt/java1.5/bin

# java

Do you get the help text now?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: Vericut installation on HPUX 11.11

Dear Robert,

when i give the command as
# which java
no java in /usr/sbin /bin /usr/bin /usr/dt/bin /usr/bin/X11 /sbin /opt/Migration/bin /usr/vue/bin /usr/ccs/bin /usr/contrib/bin /opt/hparray/bin /opt/nettladm/bin /opt/upgrade/bin /opt/fcms/bin /usr/contrib/bin/X11 /opt/graphics/common/bin /opt/pd/bin /opt/resmon/bin /opt/gnome/bin /opt/mozilla /opt/wbem/bin /opt/wbem/sbin /opt/netscape /usr/local/bin /opt/atok/bin /opt/egb/bin /opt/graphics/phigs/bin /usr/sbin/diag/contrib /opt/mx/bin /opt/OpenSource/bin /opt/vje/bin /opt/perl/bin


and

# /java1.5/jre/bin/java -version
/sbin/sh: /java1.5/jre/bin/java: not found.
Steven Schweda
Honored Contributor

Re: Vericut installation on HPUX 11.11

> cd /opt
> # find . -name java

> ./java1.5/jre/bin/java

So, it's actually
"/opt/java1.5/jre/bin/java".

This would have been more obvious if the
"find" command had looked like this:

find /opt -name java

> # /java1.5/jre/bin/java -version
> /sbin/sh: /java1.5/jre/bin/java: not found.

And, of course, there is no "/java1.5"; it's
"/opt/java1.5".

> # export PATH=$PATH:/opt/java1.5/bin

Why not "/opt/java1.5/jre/bin", which is
where the thing actually appears to be?

Re: Vericut installation on HPUX 11.11

Hi steven,

We have tried the commands but the result is shown and still the error is giving while installing vcut.

# find . -name java
./java1.4/bin/java
./java1.4/bin/PA_RISC/java
./java1.4/bin/PA_RISC2.0/java
./java1.4/bin/PA_RISC2.0W/java
./java1.4/jre/bin/java
./java1.4/jre/bin/PA_RISC/java
./java1.4/jre/bin/PA_RISC2.0/java
./java1.4/jre/bin/PA_RISC2.0W/java
./mx/j2re/bin/PA_RISC/java
./mx/j2re/bin/PA_RISC2.0/java
./mx/j2re/bin/PA_RISC2.0W/java
./mx/j2re/bin/java
./hpws/xmltools/batik/samples/tests/resources/java
./hpws/xmltools/cocoon/docs/apidocs/org/apache/cocoon/components/language/programming/java
./hpws/xmltools/fop/examples/embedding/java
./hpservices/jre/bin/PA_RISC/native_threads/java
./hpservices/jre/bin/java
./java1.2/jre/bin/PA_RISC/native_threads/java
./java1.2/jre/bin/java
./java1.2/jre/bin/PA_RISC2.0/native_threads/java
./java1.3/bin/java
./java1.3/bin/PA_RISC/native_threads/java
./java1.3/bin/PA_RISC2.0/native_threads/java
./java1.3/jre/bin/PA_RISC/native_threads/java
./java1.3/jre/bin/java
./java1.3/jre/bin/PA_RISC2.0/native_threads/java
./VRTSob/extensions/GlobalObject/IsisSkin/java
./VRTSob/extensions/ObguiPrint/IsisSkin/java
./VRTSob/extensions/PrintController/IsisSkin/java
./VRTSob/extensions/System/IsisSkin/java
./VRTSob/extensions/alertlog/IsisSkin/java
./VRTSob/extensions/controlPanel/IsisSkin/java
./VRTSob/extensions/genericlogger/IsisSkin/java
./VRTSob/extensions/VxSearch/IsisSkin/java
./VRTSob/msgcats/system/IsisSkin/java
./VRTSob/jre/bin/PA_RISC/native_threads/java
./VRTSob/jre/bin/java
./VRTSob/jre/bin/PA_RISC2.0/native_threads/java
./VRTSfspro/msgcats/system/IsisSkin/java
./java1.5/jre/bin/java
./java1.5/jre/bin/PA_RISC2.0/java
./java1.5/jre/bin/PA_RISC2.0W/java


# find . -name java
./opt/java1.4/bin/java
./opt/java1.4/bin/PA_RISC/java
./opt/java1.4/bin/PA_RISC2.0/java
./opt/java1.4/bin/PA_RISC2.0W/java
./opt/java1.4/jre/bin/java
./opt/java1.4/jre/bin/PA_RISC/java
./opt/java1.4/jre/bin/PA_RISC2.0/java
./opt/java1.4/jre/bin/PA_RISC2.0W/java
./opt/mx/j2re/bin/PA_RISC/java
./opt/mx/j2re/bin/PA_RISC2.0/java
./opt/mx/j2re/bin/PA_RISC2.0W/java
./opt/mx/j2re/bin/java
./opt/hpws/xmltools/batik/samples/tests/resources/java
./opt/hpws/xmltools/cocoon/docs/apidocs/org/apache/cocoon/components/language/programming/java
./opt/hpws/xmltools/fop/examples/embedding/java
./opt/hpservices/jre/bin/PA_RISC/native_threads/java
./opt/hpservices/jre/bin/java
./opt/java1.2/jre/bin/PA_RISC/native_threads/java
./opt/java1.2/jre/bin/java
./opt/java1.2/jre/bin/PA_RISC2.0/native_threads/java
./opt/java1.3/bin/java
./opt/java1.3/bin/PA_RISC/native_threads/java
./opt/java1.3/bin/PA_RISC2.0/native_threads/java
./opt/java1.3/jre/bin/PA_RISC/native_threads/java
./opt/java1.3/jre/bin/java
./opt/java1.3/jre/bin/PA_RISC2.0/native_threads/java
./opt/VRTSob/extensions/GlobalObject/IsisSkin/java
./opt/VRTSob/extensions/ObguiPrint/IsisSkin/java
./opt/VRTSob/extensions/PrintController/IsisSkin/java
./opt/VRTSob/extensions/System/IsisSkin/java
./opt/VRTSob/extensions/alertlog/IsisSkin/java
./opt/VRTSob/extensions/controlPanel/IsisSkin/java
./opt/VRTSob/extensions/genericlogger/IsisSkin/java
./opt/VRTSob/extensions/VxSearch/IsisSkin/java
./opt/VRTSob/msgcats/system/IsisSkin/java
./opt/VRTSob/jre/bin/PA_RISC/native_threads/java
./opt/VRTSob/jre/bin/java
./opt/VRTSob/jre/bin/PA_RISC2.0/native_threads/java
./opt/VRTSfspro/msgcats/system/IsisSkin/java
./opt/java1.5/jre/bin/java
./opt/java1.5/jre/bin/PA_RISC2.0/java
./opt/java1.5/jre/bin/PA_RISC2.0W/java
./data/java
./shared/jre/bin/PA_RISC2.0/java
./shared/jre/bin/PA_RISC2.0W/java
./shared/jre/bin/java
./shared/test/bin/java
./shared/test/bin/PA_RISC2.0/java
./shared/test/bin/PA_RISC2.0W/java
./shared/java
#


Torsten.
Acclaimed Contributor

Re: Vericut installation on HPUX 11.11

# export PATH=$PATH:/opt/java1.5/jre/bin

# java

Do you get the help text now?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: Vericut installation on HPUX 11.11

Dear Torsten,

after setting path using
#export PATH=$PATH:/opt/java1.5/jre/bin


while executed the command

#java
the cursor goes to second line blink and not giving further resonse

Re: Vericut installation on HPUX 11.11


Dear Sir,

We have download the JAVA depot from the following link https://h20392.www2.hp.com/portal/swdepot/try.do?productNumber=JDKJRE5018

PA RISC JREaa 5.0.18 Nov 09

After installing the same we are facing the above problems..is it the proper version? for HP unix 11.11
Steven Schweda
Honored Contributor

Re: Vericut installation on HPUX 11.11

> We have download the JAVA depot from the
> following link
> [...]

I'll assume that you got there from:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPUXJDKJRE50

Did you also see the link to:

http://docs.hp.com/en/HPUXJAVAPATCHES/index.html

If not, then you probably should look into
it.


> [...] HPUX 11.11 V2 [...]

What, exactly, is that? Showing actual
commands with their actual output can be more
helpful than vague descriptions and
interpretations. For example, around here:

dy # uname -a
HP-UX dy B.11.11 U 9000/785 2012616114 unlimited-user license

dy # /opt/java1.5/jre/bin/java -version
java version "1.5.0.04"
[...]

Re: Vericut installation on HPUX 11.11


Dear Steven,

when iam executing the below command the result is as below.

# opt/java1.5/jre/bin/java -version
/sbin/sh: opt/java1.5/jre/bin/java: not found.


But Java 1.5 JRE for HP-UX is showing in swlist

Thanks & Regards,
Jinu