HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Verify failed PHCO_27408.LVM-RUN,l=/,r=1.0 -patch how to fix

 
SOLVED
Go to solution
Rajendra prasad NVR
Frequent Advisor

Verify failed PHCO_27408.LVM-RUN,l=/,r=1.0 -patch how to fix

I exececuted the swverify \* . I am getting below error message in swagent.log. Please let me know how to fix this.

ERROR: Fileset "PHCO_27408.LVM-RUN,l=/,r=1.0" had file errors.
ERROR: Verify failed PHCO_27408.LVM-RUN,l=/,r=1.0
ERROR: 1 of 846 filesets had Errors.
* 845 of 846 filesets had no Errors or Warnings.
ERROR: The Analysis Phase had errors. See the above output for
ERROR: File "/sbin/lvchange" should have mtime "1028747892" but the
ERROR: File "/sbin/lvchange" should have size "815104" bytes but the
ERROR: File "/usr/sbin/lvchange" should have mtime "1028747895" but
ERROR: File "/usr/sbin/lvchange" should have size "528384" bytes but
ERROR: Fileset "PHCO_27408.LVM-RUN,l=/,r=1.0" had file errors.
ERROR: Verify failed PHCO_27408.LVM-RUN,l=/,r=1.0
2 REPLIES
Robert-Jan Goossens
Honored Contributor
Solution

Re: Verify failed PHCO_27408.LVM-RUN,l=/,r=1.0 -patch how to fix

Hi,

Download and install the latest recommended LVM commands cumulative patch PHCO_34196, and check if you have the depending patch PHKL_24779 installed.

http://www13.itrc.hp.com/service/patch/patchDetail.do?patchid=PHCO_34196&sel={hpux:11.11,}&BC=main|search|#Patch%20Dependencies:

Regards,
Robert-Jan

Re: Verify failed PHCO_27408.LVM-RUN,l=/,r=1.0 -patch how to fix