1748183 Members
3606 Online
108759 Solutions
New Discussion юеВ

Re: Vpar

 
SOLVED
Go to solution
Rg_4
Advisor

Vpar

1.What is the command to halt and TOC a vpar?
2.Which command is used to load all the virtual partitions?
3.How to backup a vpar?

4 REPLIES 4
Steven E. Protter
Exalted Contributor

Re: Vpar

Shalom,

http://docs.hp.com/en/T1335-90092/ch05s09.html

http://docs.hp.com/en/T1335-90012/ch02s01.html

http://docs.hp.com/en/T1335-90098/ch11s07.html

3. You use Ignite make_net_recovery or make_tape_recovery same as a regular system to back up the OS.

SEP


Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Sajjad Sahir
Honored Contributor

Re: Vpar

Dear Friend

please see the link


http://portal.acm.org/citation.cfm?id=560386


thanks and regards

Sajjad Sahir
Sajjad Sahir
Honored Contributor

Re: Vpar

Dear Rageesh

Please the document related to npar and vpar
it will give u sound idea regarding partions
http://docs.hp.com/en/6018/T1335-90031.pdf


thanks and regards

Sajjad Sahir
Basheer_2
Trusted Contributor
Solution

Re: Vpar

Dear Rajesh.

1.What is the command to halt and TOC a vpar?
To halt r3portal from a running vpar. login into the running vpar.

vparreset -p r3portal ├в h


to toc
login to a running partition.
vparreset -p r3portal -t

2.Which command is used to load all the virtual partitions?
The first npar is also is your first vpar.
then you need to set the mode to tell if its npar mode or vpar mode.

so if you set the mode to npar, then you don't have vpar running.

If your mode is vpar mode, then this will load the vpars.
ISL> hpux /stand/vpmon
MON> vparload -p r3portal

3.How to backup a vpar?
in our case (usually this is the way it should be) each vpar has 2 disks. so we mirror the primary disk to the 2nd one.

If you mean backing up the OS, we ignite this to an ignite server.