What commant is for check drive?

[ALPHA_10]

hellow All

I need check the dip switches for the tape drive ..

What the command ?

[Steven Schweda]

Which DIP switches? Which tape drive?

> What the command ?

"Hey, you! Go check the DIP switches on the
tape drive!"

[ALPHA_10]

Sorry ,, I need check adress for tape drive ... Where is this in tru64?

[ALPHA_10]

Hi all

which place of the system programs drive?

[Mark Poeschl_2]

What version of Unix are you running?

For 5.x the 'hwmgr -view dev' command will list all devices available on your system.

For 4.x you can first look at what device special files are defined in /dev, but that doesn't guarantee the device files have been created. You need to issue a 'show device' or 'show config' command at the console level to see everything the server sees.

[Vladimir Fabecic]

You can use
# scu show edt
to list devices on all scsi buses.
This is a way how to do it on 4.X.
On 5.X it still works, but in case of FC disks you will see all paths of FC disks as different devices. But you can see Bus/Target/Lun information for every device.
Of course,
# hwmgr -show scsi
is prefered way how to get device informations on 5.X.