HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

X process consume more cpu

 
sanjayhp
Advisor

X process consume more cpu

Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 0.41 100.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.0%
2 0.71 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
--- ---- ----- ----- ----- ----- ----- ----- ----- -----
avg 0.56 50.0% 0.0% 0.0% 50.0% 0.0% 0.0% 0.0% 0.0%

System Page Size: 4Kbytes
Memory: 8081720K (1226732K) real, 14798156K (2099680K) virtual, 1718912K free Page# 1/7

CPU TTY PID USERNAME PRI NI SIZE RES STATE TIME %WCPU %CPU COMMAND
0 ? 5584 daemon 233 20 26124K 2068K run 5:31 100.80 100.63 X

Hello "X" running process is consuming more cpu load and is remain stand still. pasted TOP command out put.

OS is HP-UX 11i v3 September 2007

Any body can help how to resolve this issue.

Sanjay
5 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: X process consume more cpu

hi,

check it with the glance instead of top.

if you like it graphical them gpm.

mikap
Michal Kapalka (mikap)
Honored Contributor

Re: X process consume more cpu

hi,

did you try to patch the system, because the
September 2007 is to late for HP-UX 11.31,

but this is only my opinion.

mikap
sanjayhp
Advisor

Re: X process consume more cpu

Hi,

Installed latest patches today. But still it same.

Sanjay
Michal Kapalka (mikap)
Honored Contributor

Re: X process consume more cpu

hi,

as i told you, in my case, i always trust glance instead of top, try the glance and see if the problem is persistent.

mikap

Re: X process consume more cpu

>mikap: I always trust glance instead of top,

It is hard to believe that top would be so wrong about using 100% of a CPU.
Of course glance would be able to check networking and I/O.