HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

X server Cannot be started at display 0

 
Abdullah2704
Visitor

X server Cannot be started at display 0

Hi

Actually, I have installed HP-UX 10.20 ACE Software Bundle B6193DA (June 1999) in hp workstation C3000 in the new hard drive.  but when I boot it, it's giving me an error " X server cannot be started at display 0.

I don't know what is the problem and I am a new user in Unix.  There are also 2  fx5 graphics cards inside my system. and I started the installation from the beginning.

is it because the graphic is not configured? or 

Abdullah 

 

1 REPLY
Robert_Jewell
Honored Contributor

Re: X server Cannot be started at display 0

Most likely this is due to your network not being setup. More specifically, your system cannot resolve itself. Access the command line and run nslookup with your host name. If that falls, that is the problem.

-Bob
----------------
Was this helpful? Like this post by giving me a thumbs up below!