bad internal drive??

[Jenni Wolgast]

I know the address isn't externally available but I'm just paranoid ;) Thanks for the info!

[Torsten.]

IMHO the address is not a problem here.


I'm using 192.168.1.13 - you cannot reach me ... same for your address :-)


However, only the mods can edit the posts, ask them here

http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/bd-p/community-feedback-suggestions

then select the current thread like this one:

January/February/March 2011 Issues Requiring Moderator Intervention

http://h30499.www3.hp.com/t5/Your-Questions-Regarding-ITRC/January-February-March-2011-Issues-Requiring-Moderator/m-p/5268800#M5401

[Jenni Wolgast]

I'm not so much worried that ITRC users can see that info but all the posts here pop up on Google too... Just don't like the idea of publically announcing the host name, IP address, model, OS, etc info of my production server... I don't really think it would cause a problem but I would just feel better if I made some attempt to remove it :)

[Torsten.]

Well, post to the thread I told you.

The server model and OS is always an important information related to a question.



BTW, did you run the suggested command?

# /opt/resmon/bin/resdata -R 258801666 -r /storage/events/disks/default/1_0_0_3_
0.6.0 -n 258801665 -a






And by the way, your diags software is from 2004!


Update!

[melvyn burnard]

IP address deleted

[Jenni Wolgast]

Thank you melvyn!

Torsten, thanks for the link to the other thread! I know the system information is necisary here for troublshooting, but I think it could also be dangerous when listed with info on how to reach that box :) And the results of the command are listed below the line saying to run the command, thanks again for the help!

[Torsten.]

>> but I think it could also be dangerous when listed with info on how to reach that box :)



Agreed, but nobody can reach your server if there is a private network IP only.


However, how about the disk problem?

Solved?

[Jenni Wolgast]

Still a work in progess... Have a case open with HP but I'm still open to ideas from y'all, I'll be sure to post the resolution if it comes from HP instead of here tho :)