System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

bonding configuration error with custom netwrok speed -Flex10

 
caj
Frequent Advisor

bonding configuration error with custom netwrok speed -Flex10

Hi ,

I am getting warning message while trying to create bond0 with a custom specified network speed of 8G .Getting the following error .But I am able to create bond with 1 Gb of custom speed in bl460c g7 with flex 10.

May 22 20:53:28 localhostkernel: bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
May 22 20:53:28 localhostkernel: bonding: bond0: setting mode to active-backup (1).
May 22 20:53:28 localhostkernel: bonding: bond0: Setting MII monitoring interval to 100.
May 22 20:53:28 localhostkernel: ADDRCONF(NETDEV_UP): bond0: link is not ready May 22 20:53:28 localhostkernel: bonding: bond0: Adding slave eth0.
May 22 20:53:28 localhostkernel: eth0: Link up May 22 20:53:28 localhostkernel: bonding: bond0: Warning: failed to get speed and duplex from eth0, assumed to be 100Mb/sec and Full.
May 22 20:53:28 localhostkernel: bonding: bond0: making interface eth0 the new active one.
May 22 20:53:28 localhostkernel: bonding: bond0: first active interface up!
May 22 20:53:28 localhostkernel: bonding: bond0: enslaving eth0 as an active interface with an up link.
May 22 20:53:28 localhostkernel: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready May 22 20:53:28 localhostkernel: bonding: bond0: Adding slave eth1.
May 22 20:53:28 localhostkernel: eth1: Link up May 22 20:53:28 localhostkernel: bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full.
May 22 20:53:28 localhostkernel: bonding: bond0: enslaving eth1 as a backup interface with an up link.
May 22 20:53:28 localhostkernel: bond0: no IPv6 routers present May 22 20:53:53 localhostautomount[11836]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master May 22 20:53:53 localhostkernel: eth2: Link up May 22 20:53:53 localhostkernel: eth3: Link up May 22 20:53:53 localhostsshd[11876]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
May 22 20:54:05 localhostkernel: ipmi message handler version 39.1 May 22 20:54:05 localhostkernel: IPMI Watchdog: driver initialized May 22 20:54:06 localhostkernel: Fusion MPT misc device (ioctl) driver 4.00.13.09