cancel
Showing results for 
Search instead for 
Did you mean: 

boot es47 partition

franlo
Advisor

boot es47 partition

Hello all,

I'm new on end range alpha server.
I have a trucluster 5.1b with 2 nodes. the nodes are 2 es47 with one partition on each.

After a global network problem, all services of the cluster has switch on member1. The network comes up, but member2 is still unreachable. clu_get_info see member2 down.

I want to reboot the member2. I'm on the consol on MBM prompt. how can i boot the partition, i don't know Backplane managers and es47.

Thanks a lot for your help

Regards

Francois
4 REPLIES
Mark Poeschl_2
Honored Contributor

Re: boot es47 partition

At the MBM prompt you should be able to issue a 'connect' command which will get you to the default hard partition's SRM console. From there just type 'b' (for 'boot') and you will boot from the default operating system location defined for that server.
franlo
Advisor

Re: boot es47 partition

Thank Mark,

Thanks for your reactivity.

Effectively, connect give me srm prompt, but when i launch the bootstrap, system tell me "Halt Button is IN". In my cabinet, i have 2 drawers. how can i switch halt button, drawer id0, drawer id1, the both ?

here the partition view.

Thanks a lot for your help.

Regards

Francois
franlo
Advisor

Re: boot es47 partition

I found myself for boot, i return on MBM and i done "halt out -all". All is al right now.

Thanks a lot

regards

Francois
franlo
Advisor

Re: boot es47 partition

it's ok now