cancel
Showing results for 
Search instead for 
Did you mean: 

can´t boot rp2470

Nelson Chamba
Regular Advisor

can´t boot rp2470

Dear Experts,

 

I can´t boot my rp2470 because it gives me this error:

 

ISL> hpux -is

Boot

: disk(0/0/2/1.15.0.0.0.0.0;0)/stand/vmunix
Exec failed: Exec format error

 

I tried booting from many differented sources but nothing changed.

 

I can see that there are other sources here but i´n don´t what else boot from, the one i used were vmunix.prev

 

ISL> hpux ls

: disk(0/0/2/1.15.0.0.0.0.0;0)/ .

lost+found       ioconfig     bootconf          system   krs

system.d          build           vmunix             dlkm        kernrel

rootconf           krs_tmp    system.prev   dlkm.vmunix.prev

vmunix.prev   krs_lkg

 

Please advice?

Nelson Chamba\

4 REPLIES
Ajin_1
Valued Contributor

Re: can´t boot rp2470

 

 

Ref below

 

http://h30499.www3.hp.com/t5/LVM-and-VxVM/Exec-failed-Exec-format-error/m-p/5995585#M50967

Thanks & Regards
Ajin.S
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Nelson Chamba
Regular Advisor

Re: can´t boot rp2470

Dear experts,

 

I don´t even have the # how can i run these commands. I just have the ISL and GSP nothging else.

 

I have another HDD can i change the boot path or correct the boot config withou change the OS?

 

Regards,

Nelson Chamba\

Torsten.
Acclaimed Contributor

Re: can´t boot rp2470

If the disks are mirrored, you may try the other disk. From the boot menu do a "search" and "bo __" boot the path you found.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Nelson Chamba
Regular Advisor

Re: can´t boot rp2470

Hi the disk are not mirrored, i just have a new blank disk, how can i install the OS there and boot it from there.

How do I make this new boot bootable.

When i run the serach it shows me just the one that fails nothing els. Even the Core OS DVD installed on the TAPE Array 5300 it´s not showing up there to boot from.

Please any idea?

Regards,
Nelson Chamba