HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

cannot ssh to rp4440 via putty or console - root FS 100%

 
SOLVED
Go to solution
Tariq Hasan_1
Frequent Advisor

cannot ssh to rp4440 via putty or console - root FS 100%

Whenever I log in, I get kciked off via putty or console.
Can you help?
Tariq
7 REPLIES
sarfaraj ahmad
Trusted Contributor
Solution

Re: cannot ssh to rp4440 via putty or console - root FS 100%


So from where are you getting "root FS 100% " error? from MP or anywhere else?
Tariq Hasan_1
Frequent Advisor

Re: cannot ssh to rp4440 via putty or console - root FS 100%

repeated alerts being mailed from dmesg:

msgcnt 617 vxfs: mesg 001: vx_nospace - /dev/root file system full (1 block extent)

sarfaraj ahmad
Trusted Contributor

Re: cannot ssh to rp4440 via putty or console - root FS 100%

Re: cannot ssh to rp4440 via putty or console - root FS 100%

Are you logging on as root?
If so, you may have to reboot in single user mode to clean up some space.
Alex Glennie
Honored Contributor

Re: cannot ssh to rp4440 via putty or console - root FS 100%

Is the server monitored by OV ?

If yes from the OV management server

/ # /opt/OV/bin/ovdeploy -cmd "bdf" -host

Filesystem kbytes used avail %used Mounted on

/dev/vg00/lvol3 458752 458752 0 100% /

and obviously if the above works you can use rm to remove offending files or mv them off the root partition



madhuchakkaravarthy
Trusted Contributor

Re: cannot ssh to rp4440 via putty or console - root FS 100%

hi

login via mp

cm>pc -off

> pc -on

interupt in pdc
bo pri
boot in to single user mode : hpux -is

mount /usr
mount /var

it may ask for running filesystem check

fsck -y lvolname

rm the unwanted files.

note: required to check what has filled up the root file system.

regards

MC
GHUNIX
Occasional Advisor

Re: cannot ssh to rp4440 via putty or console - root FS 100%

If System Management Homepage is installed you can execute command I think on the tools menu even when filesystem is 100% full.