- Community Home
- >
- Servers and Operating Systems
- >
- Legacy
- >
- Operating System - Tru64 Unix
- >
- cannot start LSM in genvmunix
Operating System - Tru64 Unix
1752556
Members
5039
Online
108788
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Go to solution
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО04-07-2008 01:43 PM
тАО04-07-2008 01:43 PM
Hi,
I attached a new SCSI Card but cannot be detected on the current OS. so I decided to boot genvmunix.
The issue is when booting genvmunix is my usr var partitions cannot be mounted because its configured as AdvFS+LSM
LSM cannot be started on the genvmunix single user mode.
Any idea on how to work on this?
I'd like to mount the usr partition so I can run the doconfig
I attached a new SCSI Card but cannot be detected on the current OS. so I decided to boot genvmunix.
The issue is when booting genvmunix is my usr var partitions cannot be mounted because its configured as AdvFS+LSM
LSM cannot be started on the genvmunix single user mode.
Any idea on how to work on this?
I'd like to mount the usr partition so I can run the doconfig
Solved! Go to Solution.
2 REPLIES 2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО04-07-2008 06:36 PM
тАО04-07-2008 06:36 PM
Solution
hi,
this happen because when genvmunix boots, it found new scsi adapter and it reassign scsi bus numbers for adapters. And that has created new device name for your OS disk (bcoz bus number change). IF you run `scu sho edt`, you will get what i mean.
eg: bus 1 tgt 1 lun 0 = rz9
now change to bus 3 tgt 1 lun 0 = rz25
There is a workaround such as disable lsm during bootup but that will require a lot of steps.
To make it simple, remove the scsi adapter from its existing slots and install it to a slot after existing scsi adapters. Example, if you have scsi adapter in slot 2 and 5, install the new one in slot 6 and above.
Rgds
this happen because when genvmunix boots, it found new scsi adapter and it reassign scsi bus numbers for adapters. And that has created new device name for your OS disk (bcoz bus number change). IF you run `scu sho edt`, you will get what i mean.
eg: bus 1 tgt 1 lun 0 = rz9
now change to bus 3 tgt 1 lun 0 = rz25
There is a workaround such as disable lsm during bootup but that will require a lot of steps.
To make it simple, remove the scsi adapter from its existing slots and install it to a slot after existing scsi adapters. Example, if you have scsi adapter in slot 2 and 5, install the new one in slot 6 and above.
Rgds
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО04-07-2008 07:15 PM
тАО04-07-2008 07:15 PM
Re: cannot start LSM in genvmunix
systems running smootly after installing the scsi card on differnt slot
Thanks!
Thanks!
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP