System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

checkin problem with (HBA) LP10000 and tru64 5.1b

Deepak kumar_3
Frequent Advisor

checkin problem with (HBA) LP10000 and tru64 5.1b

Hi,

I have tru64 5.1b OS on APPHA ES40 up and runing. But I am not seeing any HBA (KGPSA or LP10000) entry in /var/adm/messages file. Due to this hwmgr -show scsi is not showing any storage device which i have presented to this host.

NOTE : i can see these storage device on P00>> console prompt.I have 4 (LP10000)HBA's

Any idea how to make this HBA checkin by OS.

Regards
Deepak
4 REPLIES
Ivan Ferreira
Honored Contributor

Re: checkin problem with (HBA) LP10000 and tru64 5.1b

Try booting genvmunix and compile the kernel:
>>> boot -fl i

#genvmunix

bcheckrc
lmf reset

doconfig

copy the new kernel to /

Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Mark Poeschl_2
Honored Contributor

Re: checkin problem with (HBA) LP10000 and tru64 5.1b

What is your console firmware rev? That's a very late model HBA and you probably need the latest and greated console firmware.
Deepak kumar_3
Frequent Advisor

Re: checkin problem with (HBA) LP10000 and tru64 5.1b

hi Ivan,

How to copy new kernel to /

regards
Deepak
Deepak kumar_3
Frequent Advisor

Re: checkin problem with (HBA) LP10000 and tru64 5.1b

Hi Ivan,

Thanks a lot! gmvmunix worked.

Regards
Deepak