cancel
Showing results for 
Search instead for 
Did you mean: 

cmnetd: lan10 failed

motorello76
Occasional Contributor

cmnetd: lan10 failed

Hi Guys,

Do you know what means this error messagge in syslog.log ?

"cmnetd: lan10 failed"
"cmnetd: lan10 recovered"

These appeared for three time in 10 minute.

May be a fault in ethernet card? Or may depends from the lan?

Thank you for your help!
4 REPLIES
rariasn
Honored Contributor

Re: cmnetd: lan10 failed

Hi;

Verify your LAN configuracion.

* Hardware LAN
* Cable
* Network switch port
* Network switch port configuration


rgs,
likid0
Honored Contributor

Re: cmnetd: lan10 failed

You can also get more info, running on the server:

netfmt -f /var/adm/nettl.LOG000
Windows?, no thanks
SUDHAKAR_18
Trusted Contributor

Re: cmnetd: lan10 failed

pls post #cmviewcl -v o/p.

look like lan failure, may be physical lan cable got disconnected for the moment.

and it got recovered, if this error occur again and again, then you need to check lan cable.
SoorajCleris
Honored Contributor

Re: cmnetd: lan10 failed

Hi,

Just check your nettl logs , that will tell you what happend..

regards,
Sooraj
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie