cancel
Showing results for 
Search instead for 
Did you mean: 

command required

madhudeepan
Frequent Advisor

command required

version : hp-ux 11i v3
model rx 8640

how to find

FW ver

partition

HP-UX OE

System Production NO

CPU types and speed

Memory modules

memory in gb

mirror disk

Patch Bundle(B.11.23.0409.3)

raid level

scsi address

HBA(driver)firmware revision

Secure Path

RM

RM LIB

Online Diagnostics

Ignite Version

H/W Enablement(B.11.23.0712.070)

SAID

CPU Cores

Installation. Date
5 REPLIES
Mark S Meadows
Valued Contributor

Re: command required

Hi,

Try running the command "print_manifest" and/or "/opt/cfg2html/cfg2html". These should supply the majority of the information that you are after.

Please note that both commands will take a while to run.

Regards,

Mark
Administrating HP-UX systems for more years than I care to admit, but still enjoying it (most of the time!).
Mark S Meadows
Valued Contributor

Re: command required

Hi,

In addition to the above you could also run the commands :

machinfo
parstatus - npar
vparstatus - vpar

With regards to the firmware version of the HBA Cards :

# ioscan -funNC fc
Class I H/W Path Driver S/W State H/W Type Description
==================================================================
fc 0 0/0/4/1/0 fcd CLAIMED INTERFACE HP AB378-60101 4Gb
Single Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd0
fc 1 0/0/5/1/0 fcd CLAIMED INTERFACE HP AB378-60101 4Gb
Single Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd1
fc 2 0/0/12/1/0 fcd CLAIMED INTERFACE HP AB378-60101 4Gb
Single Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd2
fc 3 0/0/13/1/0 fcd CLAIMED INTERFACE HP AB378-60101 4Gb
Single Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd3

# fcmsutil /dev/fcd0 vpd
V I T A L P R O D U C T D A T A
--------- ------------- -------

Product Description : HP PCI-X 2.0 4Gb Fibre Channel HBA

Part number : AB378-60101

Engineering Date Code : A-4713

Part Serial number : JP47210650

Misc. Information : PW=7.5W;PCI=66MHZ;PCI-X=266MHZ

Mfd. Date : 4721

Mfd. ID : AB378-60101

Check Sum : 0x30

EFI version : 01.09

ROM Firmware version : 04.00.90

BIOS version : 01.26

FCODE version : 01.17

Asset Tag : NA


Regards,

Mark
Administrating HP-UX systems for more years than I care to admit, but still enjoying it (most of the time!).
Jaime Bolanos Rojas.
Honored Contributor

Re: command required

Hi Sir,

If you are going to put people to do your homework, you might as well give them points for the answers provided.

Regards,

Jaime.
Work hard when the need comes out.
Suraj K Sankari
Honored Contributor

Re: command required

Hi,

Best option is run NICKEL script to get all information about your system.
download the same from this below location

ftp://ftp.hp.com/pub/catia/Utils/nickel.shar

Suraj
Johnson Punniyalingam
Honored Contributor

Re: command required

nickel script can give you more information than what you have posted.

pls give try.:)

Rgds,
Johnson
Problems are common to all, but attitude makes the difference