1748124 Members
3239 Online
108758 Solutions
New Discussion

configuring 0mn and 1mn

 
Edgar Brito
Advisor

configuring 0mn and 1mn




My cluster is formed by two nodes, let us say node1 and node2.

When I do an Ignite with make_tape_recovery

node1 points to /dev/rmt/0mn

and

node2 points to /dev/rmt/1mn


I would like to know where can I set this parameters?
1 REPLY 1
Michael Steele_2
Honored Contributor

Re: configuring 0mn and 1mn

Hi

Can I see node 1: ioscan -fnC tape
node 2: ioscan -fnc tape
-and-

cmviewcl -v
Support Fatherhood - Stop Family Law