System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

create the first vpar form Genesis n_Partition.

SOLVED
Go to solution
HP UNIX Professionals
Frequent Advisor

create the first vpar form Genesis n_Partition.

Hi,

Anybody know how to create the first vpar form the Genesis n_Partition.

I know the procedure for creating Genesis n_par, anybody help me how to create the first vpar form this npar and give me the command also


Thanks in advance
Vinay

GSP:CM> CC

G - Genesis Complex Profile
L - Last Complex Profile
Select Profile: g

Enter Cabinet number: 0

Enter Slot number: 0

Do you want to modify the complex profile? (Y/[N]) y

-> The complex profile will be modified.
GSP:CM>

Enable the Boot:
GSP:CM> BO
5 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: create the first vpar form Genesis n_Partition.

Go to http://docs.hp.com/en/vse.html to find the manual.

http://www.hp.com/go/hpux-vpars-docs


Find the

HP-UX Virtual Partitions Release Notes A.05.06 (HP-UX 11i v3) (T1335-91005, March 2010)

document. It has all the step by step procedures.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: create the first vpar form Genesis n_Partition.

HP-UX Virtual Partitions Administrator Guide (includes A.05.06) (T1335-91006, March 2010)

is the administration manual.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
HP UNIX Professionals
Frequent Advisor

Re: create the first vpar form Genesis n_Partition.

Hi Guys

I am already have these type of document but i want the steps only.

thanks

vinay
melvyn burnard
Honored Contributor

Re: create the first vpar form Genesis n_Partition.

well it is all laid out in those documents, spend some time and read them
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
atul2701
Frequent Advisor

Re: create the first vpar form Genesis n_Partition.

Hi Vinay

its better to read some vpar admin guide posted above. But here is the brif overview on how create the vpar.

Boot your Genesis n_Partition & install the OS from ignite or media.
Modify your n-par if you want to add more cells.
Install v-par software.
Create the new vpar using vparcreate command.
if you want to create more than one vpar than create required no. of vpars using vparcreate command.
Install the os on remaining vpars.
Update the auto file (for pa risc "hpux /stand/vpmon" & for integrity "boot /stand/vpmon")
if your server is integrity server than change the booting environment to vpar.
Atul Gupta