HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

cstm problem..

 
vas_3
Advisor

cstm problem..

Hi All,

I am trying to select a remote system for test by using below commands...

>cstm
>cs

Getting some error.we can find the error in attached file.

My checks...

--> diagmond deamon is running.
-->LOCAL_ONLY_ENABLE parameter commented in /var/stm/config/sys/diagmond.cfg file.
-->/var/stm/config/sys/local_only file is deleted.
-->Network is also ok.

wt is problem?.

Thanks in advance...
Regards
Srinu.
3 REPLIES
Ganesan R
Honored Contributor

Re: cstm problem..

Hi,

Are you able to resolve the host name "btc3h004" from local host "ingbtc02" using nslookup?

If you are using DNS try with FQDN or with ip address.
Best wishes,

Ganesh.
vas_3
Advisor

Re: cstm problem..

Yes...

it's resloving the btc3h004 server..


ingbtc02#nslookup btc3h004
Using /etc/hosts on: ingbtc02

looking up FILES
Name: btc3h004
Address: 165.114.33.239

Re: cstm problem..

Have u checked

cstm>uial
or
cstm>lsal

Is there any log?