dmesg output showing error

[mrmo07]

hi!!

dmesg output getting following error

CMC[0]:SBE address FIFO full.
MCA/CMC[0]:handler = OS_CPEV, sub_type = Generic
MCA/CMC[0]:00 00 00 01 00 00 20 01 e0 00 00 00 00 21 62 40
MCA/CMC[0]:00 00 00 00 0c 8b 66 28 00 00 00 00 37 11 fd 40
MCA/CMC[0]:4c bd 77 4a 00 00 00 00 00 00 00 00 00 00 00 00

CMC[0]:SBE address FIFO full.
MCA/CMC[0]:handler = OS_CPEV, sub_type = Generic
MCA/CMC[0]:00 00 00 01 00 00 20 01 e0 00 00 00 00 21 62 40
MCA/CMC[0]:00 00 00 00 0c 8b 66 28 00 00 00 00 37 11 fa c0
MCA/CMC[0]:4c bd 79 a2 00 00 00 00 00 00 00 00 00 00 00 00

pls help. syslog attached.

[TTr]

You need to install a patch.

For 11.23 it is PHKL_30289

[mrmo07]

Hi !

as it is production server in cluster environment is there any other way except patch !!

Regards/Morshed.

[TTr]

How many of these messages do you get?
You should look in the diagnostic logs to see if there is a hardware issue somewhere. If you have a support contract, call for support.

All the patch does is suppress the messages, it does not fix anything. Based on the patch description these are single bit errors in the memory and if you only get a few you can ignore them.

[mrmo07]

hi !

i want to install PHKL_31500 to fix this error with dependant patch PHKL_33312. server is in cluster environment. i want to install in backup node first (dtcellf). see the attach file if help. can anybody give me details action plan to perform this job as it is in cluster.

[vishnu.khandare]

Hi,
from the output u have attached, its clear that ur cluster package is up and runing no issues in that, only ur no able to view the status by cmviewcl.
As guided please download the patches PHKL_31500, with dependent patch PHKL_33312.

Check where u want to install this patch, where the package is running or on other node,
Its good that its in cluster environment.

#swinstall -s /path to patches

Analysis the patches and check whether it require reboot or not depend upon that, if its downtime dependent go ahead.

Hope this solves ur issue
Don't forget to assign points

Regards
Vishnu Khandare

[mrmo07]

Hi could u please give me little bit details.

as i need to disconnect 2nd node from cluster. i need to know what procedure i need to follow in cluster environment.

Regards/Morshed.

[vishnu.khandare · Accepted solution]

where u want to install the patches on which node???
Is package running on the same node??

If not then no issues u can install in normal procedure.
If yes stop application, stop package halt the cluster and install patches.

Regards
Vishnu Khandare

[mrmo07]

package running on dtcellm but first i want to install on dtcellf (backup node). if it is ok then i will do on dtcellm where package is running.

Regards/Morshed.