HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

drd_scan_hw_host (part of DRD) hangs

 
David G. Douthitt
Regular Advisor

drd_scan_hw_host (part of DRD) hangs

I installed DRD version B.1131.A.3.4.91 onto an Itanium system with HPUX 11i v3 (B.11.31) Mission Critical OE.

When I run "drd clone -p -v -t /dev/disk/disk82" it gets to "* Reading Current System Information" and hangs. Attempting to trace the drd_scan_hw_host command with tusc results only in repeated errors of "failed system call" (presumably because the trace request is being ignored).

A kill has no effect on drd_scan_hw_host, and neither does a kill -9 (so now there's three zombies).

What gives? Can anyone help get this working? Thanks.
1 REPLY
David G. Douthitt
Regular Advisor

Re: drd_scan_hw_host (part of DRD) hangs

Is there any ideas as to what might be wrong here?